Month: February 2020

Can Acrylic Bathtubs Be Reglazed?

Can acrylic bathtubs be reglazed? This is a very common question among people who want to perform a refinishing job on their bathroom fixtures. Most people know that one can perform a refinishing on almost any fixture, including tubs, toilets, urinals, and sinks. Also, you can do a refinishing on all the wall tiles. Refinishing means carefully sanding the surface, applying a layer of bonding agents, and then applying a relatively thick layer of finishing substances. These substances will cure into a very hard finish that looks and feels like the original enamel. Basically, the surface will look brand new. All the cracks, rust, grime, chips, and stains will be gone after the refinishing project.

What Are Acrylic Tubs?

So, you want to use refinishing as an inexpensive tub restoration service, but don’t know if your tub can be reglazed. The good news is that it is definitely possible. In fact, you can refinish any acrylic fixture, including acrylic sinks. In case you are wondering, acrylic tubs are made out of sheets of acrylic. This material is relatively soft, so it is perfect for making a wide variety of bathtubs. However, because it is soft, acrylic usually needs to be reinforced with fiberglass. An important benefit of acrylic tubs is that they are light, so they can be installed on any level of your home.

Any Problems With Reglazing Acrylic Tubs?

Refinishing an acrylic tub is just like refinishing any other fixture. There are no special requirements or dangers. So why would replace the tub or sink when you can simply do a refinishing job? You just need an established company that does tub reglazing in New York. Why? Because refinishing is not something you should attempt to do yourself. The substances contain various chemicals, some of which are toxic. There have been many cases where even professionals suffered health problems during the refinishing of a tub or a toilet.

Reglaze, Don’t Replace!

Looking for cheap remodeling for your tub? Do you want a cost effective bathroom remodeling method? We recommend you refinish the tub! By refinishing instead of replacing the fixture, you save a lot of money. In addition, you are not throwing away an item that you can refinish and continue using. Refinishing is an eco-friendly way to change the aesthetics of your entire bathroom. And don’t forget the importance of a professional recaulking and regrouting job!

How Long Does It Take the Tub to Dry After Reglazing?

Are you considering a reglazing? Great choice! The reglazing procedure will bring your bathroom to life in no time. And best of all, it will be a cheap and safe way to restore all the fixtures in the bathroom to their former glory. This inexpensive tub restoration service is perhaps the best choice for people who don’t want to spend $2,000 to replace the bathtub. And did you know that reglazing can be performed on fixtures such as urinals, wall tiles, sinks, and even toilets? If you also do a regrouting and recaulking job, your bathroom will look like new.

The Proper Reglazing Procedure

Before we can explain how long you need to let the bathtub dry after the reglazing procedure, let’s talk about the procedure for a bit. People know only that reglazing is a cheap remodeling for your tub. It’s perfect for when you want to do a tub repair for rust stains and damage. However, few people know what the procedure involves. After the fixture is sanded and all cracks and chips repaired, the expert applies some bonding agents. Then the actual finishing substances are mixed together in a specific way and sprayed onto the fixture. After the reglazing procedure, you need to follow some simple steps.

What Homeowners Should Do

The professional from the New York tub reglazing service of your choice has just completed the refinishing project. What should you do now? The first thing to keep in mind is that the bathtub and any other fixtures that have been refinished are off limits until the coating cures. Until the finishing dries, it is a good idea to leave the house. However, it’s not necessary if the bathroom is properly ventilated.

The Perfect Drying Conditions

You should let the tub surface to cure for 24 to 48 hours. After the surface has dried, it is 100% safe to use the bathroom fixture. However, there are various things that can affect the drying time. For example, if the bathroom is not properly ventilated, if the air is too moist, or if the weather is not warm enough, you may need to let the tub cure for three to four days. Remember that the bathroom should be properly ventilated during this time. To find out the exact drying time, you should ask the reglazing professional. Some products are better than others and dry faster, but they are also more expensive.