How Much Does Reglazing/Refinishing Cost?

You may have heard about something called “reglazing,” but you probably don’t know much about the process or its costs. In this blog post, we will discuss the cost of a properly-done reglazing procedure. We will also compare it to the cost of replacing a bathtub. Basically, reglazing is the process by which the coating on your tub is replaced. The end result is a fixture that looks like a brand new one. Sounds great, doesn’t it? But is it cheaper than replacing the tub altogether? Let’s see!

The Average Price or Replacing a Bathtub

When it comes to replacing a bathtub, you probably know that the process is not only time-consuming, but also quite expensive. But just how expensive can it get? Here are the basic costs you should expect when you’re looking to replace the tub:

  • The new bathtub can cost as little as $150, but we’ll assume you are going to pick something a bit sturdier. A $300 tub should be OK for most people.
  • The faucet and drain set purchase and installation usually set homeowners back around $200.
  • Removing the old tub is no easy feat, trust us. It takes a professional an average of 5 hours to remove the old tub and dispose of it. At a price of around $35 per hour, this means you’ll have to pay $175 just to remove the old fixture.
  • New bathtub installation: around $40 to $50 per hour, plus materials. It takes 4-5 hours to get the job done, so you’re looking at an average of $200 just for the plumber.

You have just spent $875 and the job isn’t finished yet. Remember, when you replace a bathtub, you are doing construction work. You also need to remove the grout surrounding the tub. Regrouting and waste removal will set you back another $200 (at the very least). This means that the total price you’ll have to pay to replace the old tub starts from $1,075. You don’t even get a high end tub in this price.

 

How Much Does a Reglazing Cost?

Now let’s talk about reglazing. During the reglazing process, the old layer of coating is removed completely. A new layer is then applied. Also, it’s worth noting that all chips and pits are repaired during the refinishing procedure. But how much does it cost?

On average, reglazing a bathtub costs around $700. However, porcelain tubs are much cheaper to resurface: you can expect to pay as little as $475. Cast iron tubs are also pretty cheap to resurface; you should expect to pay around $500. Fiberglass tubs, on the other hand, are the most difficult to resurface. This means that you can pay anywhere from $400 to $900 to refinish one.

As you can see, reglazing is much cheaper than replacing the tub. And there are other benefits as well. For instance, reglazing does not require any construction work. You don’t have to worry about waste removal and don’t have to struggle with dust and debris. Another important benefit of refinishing is the fact that the process is eco-friendly. Why send the old tub to the landfill when you can reglaze it and continue using it for another 8 to 12 years?

Final Considerations

As you can see, reglazing is not only cheaper than replacing a tub, but also faster and easier. We know you may be tempted to buy one of the many reglazing kits available as DIY solutions on various websites. Perhaps you want to save some money. Or maybe you like DIY projects.

We strongly advise you to get a professional to reglaze your bathtub though. Why? First, because a professional knows how to work safely and protect himself from the dangerous chemicals used in the refinishing process. Second, because a professional reglazing procedure will yield the best results possible. And third, because reglazing companies use top quality products which ensure a long-lasting result. A DIY kit won’t last for more than one or two years, whereas a professional reglazing from a reliable bathtub refinishing company in Brooklyn, NY will last for up to 15 years.

Help! The Enamel Peeling Off My Bathtub

Is the enamel peeling off your bathtub? You will be surprised to find out that this happens to a lot of people every year. There are many, many things that can cause a tub’s enamel to peel off. And peeling is not the only problem homeowners encounter. In this blog post, we will discuss some of the most frequent problems with tub enamel, as well as some solutions to the problem. Out of these solutions, one works better than all the others – and it’s a lot cheaper too. Read on!

 

Frequent Enamel Problems

Problems with enamel are as old as bathtubs. Of course, some tubs don’t have enamel – but we’re not talking about those. The ones that doo can start having problems with their enamel in just 3 or 4 years. Higher end models can last up to 6 years or even more. However, you will inevitably notice some enamel problems. Here are the most frequent of them:

  • The enamel starts to peel off. This can happen in just a few places or across the entire surface of the tub. The enamel will start to peel faster in places where the tub has been damaged (chips, cracks, acidic solution burns, and so on).
  • The enamel will start to change its color. From the shiny white we all love, it will slowly but surely turn to an ugly yellow or brown. Over time, the enamel is affected by the mineral deposits (especially if you live in a hard water area).
  • Over time, the enamel will start to get damaged. Every time you drop something in the tub, the enamel gets chipped. It’s only a matter of time before the damage starts to become too extensive to overlook.

What Can You Do to Stop Enamel Peeling?

But what do you do when the enamel is yellow or when it starts to peel off? There are several solutions available, of course. If the enamel has changed its color because of the mineral deposits, you can try your luck with vinegar and baking soda. However, don’t expect outstanding results. If the enamel has peeled off, you can give a do it yourself tub repair kit a try. However, this is just a temporary solution because the new coating will start peeling off in around one year.

The extreme solution to all enamel problems is to simply replace the bathtub. However, this will set you back around $2,000 (including plumbing work and waste removal). You will also make a mess in your bathroom. If you don’t want any DIY solutions or solutions that involve construction work, you will be thrilled to learn that there is another option: reglazing.

 

The Reglazing Solution

Bathtub reglazing has become a very popular solution for people who want to bring their old tub back to life without replacing it. If you want a durable solution, refinishing is your best choice. During the reglazing process, the enamel is removed completely through sanding and all the cracks and chips are repaired. One or two layers of primer and bonding agents are applied to the surface of the tub. The final step is the coating, which is applied in one or two layers. Once the coating cures, your tub will look just like a brand new one.

 

Benefits of Resurfacing a Tub

So, why would you choose to resurface a bathtub instead of replacing it? Here are just some of the most significant benefits:

  • You don’t have to do any construction work, so you don’t have to pay for plumbing work and waste removal.
  • Reglazing a tub is much cheaper than replacing it.
  • The refinishing process is environmentally friendly. You don’t have to send the old tub to the landfill anymore.
  • The tub will look like brand new and you can even choose to change its color.
  • You can reglaze other fixtures, such as the sink and toilet. You can also reglaze floor and wall tiles.

As you can see, reglazing a bathtub is clearly the best option for people who are starting to notice problems with the tub’s enamel. Are you looking for the best tub refinishing service in NYC? Get in touch with us today.

 

 

Easy Sink and Toilet Refinishing

There comes a time when your sink and toilet may need to be replaced. They will become an eye sour in time; it’s inevitable. However, there is another option you can try. Replacing the sink and toilet will cost a lot of money and require extensive construction work. Remember that you also need to pay for plumbing work. In this blog post, we will discuss replacing the fixtures, as well as the option we’ve mentioned earlier. Which is better? What about costs? What does each procedure require of you? Let’s find out!

 

Is Replacing a Sink or Toilet a Good Choice?

Most people will simply replace the sink or the toilet when they need replacing. However, did you stop to think about what replacing these fixtures means? First, you will need to spend hundreds of dollars on new fixtures. Then, you must pay to have the old sink and toilet removed (trust us, it’s not as easy as you think, especially if they are wall-mounted). Finally, you need to pay to install the new fixtures and then replace or repair the plumbing. The entire process can set you back as much as $2,000. But what if you could pay less and get the same result?

 

What About Reglazing the Sink and Toilet?

Refinishing a sink or a toilet is much cheaper than replacing them. It’s also a lot easier and quicker. You’ve surely heard about reglazing. Resurfacing – and refinishing – is just another term for reglazing. Basically, the enamel will be completely replaced to give your sink and toilet a brand new look. Our experts can even change the color of your fixtures if you want.

Refinishing Saves You Money

The most important benefit of refinishing a sink or toilet is savings. We’ve discussed the costs of replacing the fixtures above, so you have a general idea about what to expect. When it comes to reglazing, however, things get interesting:

  • The reglazing process does not involve any construction work. You do not have to remove the old fixtures or install new ones.
  • Refinishing does not require plumbing work. The old plumbing remains in place, so you instantly save money.
  • Resurfacing a sink or a toilet costs significantly less than replacing it. You can save up to 50% of the money.
  • Reglazed sinks and toilets can last for up to 8 more years, so you don’t need to send them to the landfill.

 

Reglazing Protects the Environment

Did you ever think about the final destination of all the fixtures you replace? They reach the landfill and then they start damaging the environment. On the other hand, our refinishing solution (we are a reliable NYC bathtub reglazing company) is eco-friendly. The materials, solutions and chemicals we use do not damage the environment. Obviously, you don’t have to send anything to the landfill either. If you care about the environment, reglaze – don’t replace.

 

What to Expect From a Resurfacing Procedure?

Resurfacing a sink or toilet is, as we’ve proven, a sustainable way of bringing them back to life. It’s also a cheap alternative to replacing. But what should you expect from the reglazing procedure? Are the end results worth it? Of course they are! Here are some of the key points to keep in mind:

  1. A reglazed sink or toilet will look like brand new. The coating will be shiny, just like the original enamel.
  2. You can continue using the sink or toilet for 8 more years, if you take care of the surface. This means avoiding harsh cleaning products, bleach, acids, etc.
  3. The coating will not peel off, nor will it discolor. You can rest assured that our experts use professional products during the reglazing procedure.

Bottom line, refinishing your sink and toilet is the best way to go. It saves you money and gets you a fixture that looks like it’s brand new. It’s also an environmentally friendly option. So, why would you replace instead of reglaze?