Is It Time to Reglaze Your Tub?

You’ve probably heard about professional reglazing services. Also known as tub refinishing, reglazing is a relatively simple process which is used to restore a bathtub to its former glory. The coating will be removed completely and replaced with a new one. This will make your old tub look like a brand new one. In fact, nobody will be able to tell the difference (well, perhaps a reglazing expert could).

Bottom line, refinishing a tub is the simple way to change the look of your bathroom. But how do you know it’s time to reglaze the tub? What are the signs your tub needs a new layer of glaze? Let’s find out!

 

Is It Time to Refinish the Tub?

You are probably wondering if it is time to get in touch with a company that reglazes bathtubs. If you are not convinced that your tub needs a new coating and perhaps even a new look, take a look at just some of the reasons you should get in touch with us:

  • Chipping – tubs that are used regularly often have chips all around the surface. Anything that falls onto the surface of the tub (including the showerhead) can cause a nasty chip.
  • Discoloration of the tub – old tubs often become discolored. The coating is starting to show its age. Even worse, the tub may turn brownish-yellow or grey.
  • Unable to clean the bathtub – this is often caused by the worn-off glaze. Grime and dirt will start to adhere to the surface of the tub and become more and more difficult to remove.
  • Dull tub – a shiny bathtub makes your bathroom shine. However, this cannot be said about your old, worn-out tub. Maybe it’s time to change this?
  • You don’t like the color of the tub – if you have just purchased a new home, you may not like what you see in the bathroom. Don’t worry about it; our experts can change the color of the tub during the reglazing procedure.

 

What Happens During the Resurfacing Process?

If your tub has one of the problems listed above, it’s time to get it resurfaced. But what does resurfacing actually mean? Here are the basic steps of the process:

  1. Our Brooklyn tub refinishing expert will first cover everything surrounding the bathtub to make sure the chemicals don’t get on other fixtures or on the wall or floor tiles.
  2. The grouting around the tub is removed if necessary. Don’t worry, we can regrout it after the refinishing process is complete.
  3. The surface of the tub is sanded down or etched using various chemicals (depending on the material of you tub).
  4. Chips and dents are repaired. All signs of rust are removed. We want to make sure the end result is perfect, after all.
  5. A primer is applied to the entire surface of the tub and left to dry for a bit.
  6. The layer of coating is applied evenly on the surface of the tub. If necessary, our expert will apply a second layer of coating.
  7. The new glaze is left to cure for 7 to 10 days. Do not use the tub during this time to avoid damaging the new coating.

 

Final Considerations

Reglazing a bathtub is cheaper than replacing it, so you can save a substantial amount of money while also avoiding doing construction work in your home. However, remember to let the glaze cure for at least one week. During this time, you should only clean the tub using a soft sponge and water. Even after the curing period, you should never use any harsh cleaners (or cleaners that contain ammonia). Never use abrasive substances or materials and avoid pressure washing at all costs.

If you follow this advice, you can expect your newly-coated bathtub to remain in pristine condition for 7 to 10 more years. It’s definitely a better alternative to sending the tub to the landfill and paying for a new one (plus installation and waste removal costs).

 

How to Change the Color of My Tiles or Tub?

How to Change the Color of My Tiles or Tub?

Nowadays, more and more people are complaining about the price of replacing some wall or floor tiles. Not to mention how expensive replacing a bathtub can be. If you are having some problems with your bathtub or are struggling to find a way to completely change the look of your bathroom or kitchen, it’s time to look at some of your best options. Let’s talk about changing the color of your tiles and bathroom fixtures quickly and painlessly.

 

Outdated Bathroom?

Do you think your bathroom is outdated? Don’t like the color of the wall and floor tiles anymore? Don’t worry; it happens to everyone at some point. As your bathroom and fixtures age, they start to show signs of normal wear and tear. The tiles will start to lose their shine. In some cases, they may even start changing their color. In any case, an outdated bathroom is certainly not a pretty sight. The good news is that solving this problem isn’t very difficult.

 

Problems With Your Bathtub?

But what about the tub? What if you no longer like its color? Or perhaps the enamel has started to peel off or has changed its color to yellow or brown. This change in color is caused by mineral deposits and it’s more pronounced in areas with hard water. The enamel peeling off is normal, especially if you’ve used the tub for more than 5 years. The good news is that our company can fix these problems for you and bring your bathtub back to life.

 

The Easy Solution to All Your Problems

The easy solution to your bathtub and tile problems is reglazing. We know, you’ve probably thought about replacing the tiles and tub. But why would you spend thousands of dollars on this when you can have a modern bathroom for just a fraction of the price? By refinishing the tub, you will replace the enamel with a coating that looks exactly the same (and that is just as durable). Don’t worry, we use professional products and materials, so the coating will remain spotless for up to 8 more years. The same reglazing procedure can be applied to wall tiles and floor tiles as well.

Perhaps the most interesting part of the whole resurfacing process is that we can change the color of each fixture and even of the tiles. Our experts do this by adding dyes to the coating solution. It’s a delicate process, but the end result can be breathtaking. After all, we are the best tub reglazing service in Brooklyn, NY.

 

Is It Expensive?

We know you are probably worried about costs. You’ve probably calculated the cost of replacing the fixtures and the tiles. Replacing everything in your bathroom, plus waste removal and plumbing work, can set you back $5,000 or more. The good news is that resurfacing the fixtures and tiles can save you 50% or more. Awesome, right? Even better, our resurfacing process is eco-friendly. With our help, you don’t have to send all the tiles and old fixtures to the landfill anymore. You will be thrilled to learn that the process doesn’t involve any construction work either. But what does the reglazing process involve?

 

How Does It Work?

Refinishing the tiles and the tub is not an overly complex process. In addition, our experts have years of industry experience, so you can rest assured that they move fast. Here is how the process goes:

  1. First, the tub and tiles are sanded down and all imperfections are repaired.
  2. The primer and bonding agents are applied in one or two layers.
  3. The coating is mixed with the dyes according to your requirements. You can choose from a wide range of colors, of course.
  4. The coating is applied uniformly in one or two layers.

That’s it. The new coating cures in around 2 days, but you are strongly advised to avoid cleaning the surface for at least 7 days. The end result will be a finish that looks – and feels – like real enamel. You can now enjoy your tub and tiles for 6 to 10 more years.