There comes a time when your sink and toilet may need to be replaced. They will become an eye sour in time; it’s inevitable. However, there is another option you can try. Replacing the sink and toilet will cost a lot of money and require extensive construction work. Remember that you also need to pay for plumbing work. In this blog post, we will discuss replacing the fixtures, as well as the option we’ve mentioned earlier. Which is better? What about costs? What does each procedure require of you? Let’s find out!
Is Replacing a Sink or Toilet a Good Choice?
Most people will simply replace the sink or the toilet when they need replacing. However, did you stop to think about what replacing these fixtures means? First, you will need to spend hundreds of dollars on new fixtures. Then, you must pay to have the old sink and toilet removed (trust us, it’s not as easy as you think, especially if they are wall-mounted). Finally, you need to pay to install the new fixtures and then replace or repair the plumbing. The entire process can set you back as much as $2,000. But what if you could pay less and get the same result?
What About Reglazing the Sink and Toilet?
Refinishing a sink or a toilet is much cheaper than replacing them. It’s also a lot easier and quicker. You’ve surely heard about reglazing. Resurfacing – and refinishing – is just another term for reglazing. Basically, the enamel will be completely replaced to give your sink and toilet a brand new look. Our experts can even change the color of your fixtures if you want.
Refinishing Saves You Money
The most important benefit of refinishing a sink or toilet is savings. We’ve discussed the costs of replacing the fixtures above, so you have a general idea about what to expect. When it comes to reglazing, however, things get interesting:
- The reglazing process does not involve any construction work. You do not have to remove the old fixtures or install new ones.
- Refinishing does not require plumbing work. The old plumbing remains in place, so you instantly save money.
- Resurfacing a sink or a toilet costs significantly less than replacing it. You can save up to 50% of the money.
- Reglazed sinks and toilets can last for up to 8 more years, so you don’t need to send them to the landfill.
Reglazing Protects the Environment
Did you ever think about the final destination of all the fixtures you replace? They reach the landfill and then they start damaging the environment. On the other hand, our refinishing solution (we are a reliable NYC bathtub reglazing company) is eco-friendly. The materials, solutions and chemicals we use do not damage the environment. Obviously, you don’t have to send anything to the landfill either. If you care about the environment, reglaze – don’t replace.
What to Expect From a Resurfacing Procedure?
Resurfacing a sink or toilet is, as we’ve proven, a sustainable way of bringing them back to life. It’s also a cheap alternative to replacing. But what should you expect from the reglazing procedure? Are the end results worth it? Of course they are! Here are some of the key points to keep in mind:
- A reglazed sink or toilet will look like brand new. The coating will be shiny, just like the original enamel.
- You can continue using the sink or toilet for 8 more years, if you take care of the surface. This means avoiding harsh cleaning products, bleach, acids, etc.
- The coating will not peel off, nor will it discolor. You can rest assured that our experts use professional products during the reglazing procedure.
Bottom line, refinishing your sink and toilet is the best way to go. It saves you money and gets you a fixture that looks like it’s brand new. It’s also an environmentally friendly option. So, why would you replace instead of reglaze?
