Category: Uncategorized

You’ve probably heard about professional reglazing services. Also known as tub refinishing, reglazing is a relatively simple process which is used to restore a bathtub to its former glory. The coating will be removed completely and replaced with a new one. This will make your old tub look like a brand new one. In fact, nobody will be able to tell the difference (well, perhaps a reglazing expert could).

Bottom line, refinishing a tub is the simple way to change the look of your bathroom. But how do you know it’s time to reglaze the tub? What are the signs your tub needs a new layer of glaze? Let’s find out!

 

Is It Time to Refinish the Tub?

You are probably wondering if it is time to get in touch with a company that reglazes bathtubs. If you are not convinced that your tub needs a new coating and perhaps even a new look, take a look at just some of the reasons you should get in touch with us:

• Chipping – tubs that are used regularly often have chips all around the surface. Anything that falls onto the surface of the tub (including the showerhead) can cause a nasty chip.
• Discoloration of the tub – old tubs often become discolored. The coating is starting to show its age. Even worse, the tub may turn brownish-yellow or grey.
• Unable to clean the bathtub – this is often caused by the worn-off glaze. Grime and dirt will start to adhere to the surface of the tub and become more and more difficult to remove.
• Dull tub – a shiny bathtub makes your bathroom shine. However, this cannot be said about your old, worn-out tub. Maybe it’s time to change this?
• You don’t like the color of the tub – if you have just purchased a new home, you may not like what you see in the bathroom. Don’t worry about it; our experts can change the color of the tub during the reglazing procedure.

 

What Happens During the Resurfacing Process?

If your tub has one of the problems listed above, it’s time to get it resurfaced. But what does resurfacing actually mean? Here are the basic steps of the process:

1. Our Brooklyn tub refinishing expert will first cover everything surrounding the bathtub to make sure the chemicals don’t get on other fixtures or on the wall or floor tiles.
2. The grouting around the tub is removed if necessary. Don’t worry, we can regrout it after the refinishing process is complete.
3. The surface of the tub is sanded down or etched using various chemicals (depending on the material of you tub).
4. Chips and dents are repaired. All signs of rust are removed. We want to make sure the end result is perfect, after all.
5. A primer is applied to the entire surface of the tub and left to dry for a bit.
6. The layer of coating is applied evenly on the surface of the tub. If necessary, our expert will apply a second layer of coating.
7. The new glaze is left to cure for 7 to 10 days. Do not use the tub during this time to avoid damaging the new coating.

 

Final Considerations

Reglazing a bathtub is cheaper than replacing it, so you can save a substantial amount of money while also avoiding doing construction work in your home. However, remember to let the glaze cure for at least one week. During this time, you should only clean the tub using a soft sponge and water. Even after the curing period, you should never use any harsh cleaners (or cleaners that contain ammonia). Never use abrasive substances or materials and avoid pressure washing at all costs.

If you follow this advice, you can expect your newly-coated bathtub to remain in pristine condition for 7 to 10 more years. It’s definitely a better alternative to sending the tub to the landfill and paying for a new one (plus installation and waste removal costs).

 

How to Change the Color of My Tiles or Tub?

Nowadays, more and more people are complaining about the price of replacing some wall or floor tiles. Not to mention how expensive replacing a bathtub can be. If you are having some problems with your bathtub or are struggling to find a way to completely change the look of your bathroom or kitchen, it’s time to look at some of your best options. Let’s talk about changing the color of your tiles and bathroom fixtures quickly and painlessly.

 

Outdated Bathroom?

Do you think your bathroom is outdated? Don’t like the color of the wall and floor tiles anymore? Don’t worry; it happens to everyone at some point. As your bathroom and fixtures age, they start to show signs of normal wear and tear. The tiles will start to lose their shine. In some cases, they may even start changing their color. In any case, an outdated bathroom is certainly not a pretty sight. The good news is that solving this problem isn’t very difficult.

 

Problems With Your Bathtub?

But what about the tub? What if you no longer like its color? Or perhaps the enamel has started to peel off or has changed its color to yellow or brown. This change in color is caused by mineral deposits and it’s more pronounced in areas with hard water. The enamel peeling off is normal, especially if you’ve used the tub for more than 5 years. The good news is that our company can fix these problems for you and bring your bathtub back to life.

 

The Easy Solution to All Your Problems

The easy solution to your bathtub and tile problems is reglazing. We know, you’ve probably thought about replacing the tiles and tub. But why would you spend thousands of dollars on this when you can have a modern bathroom for just a fraction of the price? By refinishing the tub, you will replace the enamel with a coating that looks exactly the same (and that is just as durable). Don’t worry, we use professional products and materials, so the coating will remain spotless for up to 8 more years. The same reglazing procedure can be applied to wall tiles and floor tiles as well.

Perhaps the most interesting part of the whole resurfacing process is that we can change the color of each fixture and even of the tiles. Our experts do this by adding dyes to the coating solution. It’s a delicate process, but the end result can be breathtaking. After all, we are the best tub reglazing service in Brooklyn, NY.

 

Is It Expensive?

We know you are probably worried about costs. You’ve probably calculated the cost of replacing the fixtures and the tiles. Replacing everything in your bathroom, plus waste removal and plumbing work, can set you back $5,000 or more. The good news is that resurfacing the fixtures and tiles can save you 50% or more. Awesome, right? Even better, our resurfacing process is eco-friendly. With our help, you don’t have to send all the tiles and old fixtures to the landfill anymore. You will be thrilled to learn that the process doesn’t involve any construction work either. But what does the reglazing process involve?

 

How Does It Work?

Refinishing the tiles and the tub is not an overly complex process. In addition, our experts have years of industry experience, so you can rest assured that they move fast. Here is how the process goes:

1. First, the tub and tiles are sanded down and all imperfections are repaired.
2. The primer and bonding agents are applied in one or two layers.
3. The coating is mixed with the dyes according to your requirements. You can choose from a wide range of colors, of course.
4. The coating is applied uniformly in one or two layers.

That’s it. The new coating cures in around 2 days, but you are strongly advised to avoid cleaning the surface for at least 7 days. The end result will be a finish that looks – and feels – like real enamel. You can now enjoy your tub and tiles for 6 to 10 more years.

 

You may have heard about something called “reglazing,” but you probably don’t know much about the process or its costs. In this blog post, we will discuss the cost of a properly-done reglazing procedure. We will also compare it to the cost of replacing a bathtub. Basically, reglazing is the process by which the coating on your tub is replaced. The end result is a fixture that looks like a brand new one. Sounds great, doesn’t it? But is it cheaper than replacing the tub altogether? Let’s see!

The Average Price or Replacing a Bathtub

When it comes to replacing a bathtub, you probably know that the process is not only time-consuming, but also quite expensive. But just how expensive can it get? Here are the basic costs you should expect when you’re looking to replace the tub:

• The new bathtub can cost as little as $150, but we’ll assume you are going to pick something a bit sturdier. A $300 tub should be OK for most people.
• The faucet and drain set purchase and installation usually set homeowners back around $200.
• Removing the old tub is no easy feat, trust us. It takes a professional an average of 5 hours to remove the old tub and dispose of it. At a price of around $35 per hour, this means you’ll have to pay $175 just to remove the old fixture.
• New bathtub installation: around $40 to $50 per hour, plus materials. It takes 4-5 hours to get the job done, so you’re looking at an average of $200 just for the plumber.

You have just spent $875 and the job isn’t finished yet. Remember, when you replace a bathtub, you are doing construction work. You also need to remove the grout surrounding the tub. Regrouting and waste removal will set you back another $200 (at the very least). This means that the total price you’ll have to pay to replace the old tub starts from $1,075. You don’t even get a high end tub in this price.

 

How Much Does a Reglazing Cost?

Now let’s talk about reglazing. During the reglazing process, the old layer of coating is removed completely. A new layer is then applied. Also, it’s worth noting that all chips and pits are repaired during the refinishing procedure. But how much does it cost?

On average, reglazing a bathtub costs around $700. However, porcelain tubs are much cheaper to resurface: you can expect to pay as little as $475. Cast iron tubs are also pretty cheap to resurface; you should expect to pay around $500. Fiberglass tubs, on the other hand, are the most difficult to resurface. This means that you can pay anywhere from $400 to $900 to refinish one.

As you can see, reglazing is much cheaper than replacing the tub. And there are other benefits as well. For instance, reglazing does not require any construction work. You don’t have to worry about waste removal and don’t have to struggle with dust and debris. Another important benefit of refinishing is the fact that the process is eco-friendly. Why send the old tub to the landfill when you can reglaze it and continue using it for another 8 to 12 years?

Final Considerations

As you can see, reglazing is not only cheaper than replacing a tub, but also faster and easier. We know you may be tempted to buy one of the many reglazing kits available as DIY solutions on various websites. Perhaps you want to save some money. Or maybe you like DIY projects.

We strongly advise you to get a professional to reglaze your bathtub though. Why? First, because a professional knows how to work safely and protect himself from the dangerous chemicals used in the refinishing process. Second, because a professional reglazing procedure will yield the best results possible. And third, because reglazing companies use top quality products which ensure a long-lasting result. A DIY kit won’t last for more than one or two years, whereas a professional reglazing from a reliable bathtub refinishing company in Brooklyn, NY will last for up to 15 years.

Is the enamel peeling off your bathtub? You will be surprised to find out that this happens to a lot of people every year. There are many, many things that can cause a tub’s enamel to peel off. And peeling is not the only problem homeowners encounter. In this blog post, we will discuss some of the most frequent problems with tub enamel, as well as some solutions to the problem. Out of these solutions, one works better than all the others – and it’s a lot cheaper too. Read on!

 

Frequent Enamel Problems

Problems with enamel are as old as bathtubs. Of course, some tubs don’t have enamel – but we’re not talking about those. The ones that doo can start having problems with their enamel in just 3 or 4 years. Higher end models can last up to 6 years or even more. However, you will inevitably notice some enamel problems. Here are the most frequent of them:

• The enamel starts to peel off. This can happen in just a few places or across the entire surface of the tub. The enamel will start to peel faster in places where the tub has been damaged (chips, cracks, acidic solution burns, and so on).
• The enamel will start to change its color. From the shiny white we all love, it will slowly but surely turn to an ugly yellow or brown. Over time, the enamel is affected by the mineral deposits (especially if you live in a hard water area).
• Over time, the enamel will start to get damaged. Every time you drop something in the tub, the enamel gets chipped. It’s only a matter of time before the damage starts to become too extensive to overlook.

What Can You Do to Stop Enamel Peeling?

But what do you do when the enamel is yellow or when it starts to peel off? There are several solutions available, of course. If the enamel has changed its color because of the mineral deposits, you can try your luck with vinegar and baking soda. However, don’t expect outstanding results. If the enamel has peeled off, you can give a do it yourself tub repair kit a try. However, this is just a temporary solution because the new coating will start peeling off in around one year.

The extreme solution to all enamel problems is to simply replace the bathtub. However, this will set you back around $2,000 (including plumbing work and waste removal). You will also make a mess in your bathroom. If you don’t want any DIY solutions or solutions that involve construction work, you will be thrilled to learn that there is another option: reglazing.

 

The Reglazing Solution

Bathtub reglazing has become a very popular solution for people who want to bring their old tub back to life without replacing it. If you want a durable solution, refinishing is your best choice. During the reglazing process, the enamel is removed completely through sanding and all the cracks and chips are repaired. One or two layers of primer and bonding agents are applied to the surface of the tub. The final step is the coating, which is applied in one or two layers. Once the coating cures, your tub will look just like a brand new one.

 

Benefits of Resurfacing a Tub

So, why would you choose to resurface a bathtub instead of replacing it? Here are just some of the most significant benefits:

• You don’t have to do any construction work, so you don’t have to pay for plumbing work and waste removal.
• Reglazing a tub is much cheaper than replacing it.
• The refinishing process is environmentally friendly. You don’t have to send the old tub to the landfill anymore.
• The tub will look like brand new and you can even choose to change its color.
• You can reglaze other fixtures, such as the sink and toilet. You can also reglaze floor and wall tiles.

As you can see, reglazing a bathtub is clearly the best option for people who are starting to notice problems with the tub’s enamel. Are you looking for the best tub refinishing service in NYC? Get in touch with us today.

 

 

There comes a time when your sink and toilet may need to be replaced. They will become an eye sour in time; it’s inevitable. However, there is another option you can try. Replacing the sink and toilet will cost a lot of money and require extensive construction work. Remember that you also need to pay for plumbing work. In this blog post, we will discuss replacing the fixtures, as well as the option we’ve mentioned earlier. Which is better? What about costs? What does each procedure require of you? Let’s find out!

 

Is Replacing a Sink or Toilet a Good Choice?

Most people will simply replace the sink or the toilet when they need replacing. However, did you stop to think about what replacing these fixtures means? First, you will need to spend hundreds of dollars on new fixtures. Then, you must pay to have the old sink and toilet removed (trust us, it’s not as easy as you think, especially if they are wall-mounted). Finally, you need to pay to install the new fixtures and then replace or repair the plumbing. The entire process can set you back as much as $2,000. But what if you could pay less and get the same result?

 

What About Reglazing the Sink and Toilet?

Refinishing a sink or a toilet is much cheaper than replacing them. It’s also a lot easier and quicker. You’ve surely heard about reglazing. Resurfacing – and refinishing – is just another term for reglazing. Basically, the enamel will be completely replaced to give your sink and toilet a brand new look. Our experts can even change the color of your fixtures if you want.

Refinishing Saves You Money

The most important benefit of refinishing a sink or toilet is savings. We’ve discussed the costs of replacing the fixtures above, so you have a general idea about what to expect. When it comes to reglazing, however, things get interesting:

• The reglazing process does not involve any construction work. You do not have to remove the old fixtures or install new ones.
• Refinishing does not require plumbing work. The old plumbing remains in place, so you instantly save money.
• Resurfacing a sink or a toilet costs significantly less than replacing it. You can save up to 50% of the money.
• Reglazed sinks and toilets can last for up to 8 more years, so you don’t need to send them to the landfill.

 

Reglazing Protects the Environment

Did you ever think about the final destination of all the fixtures you replace? They reach the landfill and then they start damaging the environment. On the other hand, our refinishing solution (we are a reliable NYC bathtub reglazing company) is eco-friendly. The materials, solutions and chemicals we use do not damage the environment. Obviously, you don’t have to send anything to the landfill either. If you care about the environment, reglaze – don’t replace.

 

What to Expect From a Resurfacing Procedure?

Resurfacing a sink or toilet is, as we’ve proven, a sustainable way of bringing them back to life. It’s also a cheap alternative to replacing. But what should you expect from the reglazing procedure? Are the end results worth it? Of course they are! Here are some of the key points to keep in mind:

1. A reglazed sink or toilet will look like brand new. The coating will be shiny, just like the original enamel.
2. You can continue using the sink or toilet for 8 more years, if you take care of the surface. This means avoiding harsh cleaning products, bleach, acids, etc.
3. The coating will not peel off, nor will it discolor. You can rest assured that our experts use professional products during the reglazing procedure.

Bottom line, refinishing your sink and toilet is the best way to go. It saves you money and gets you a fixture that looks like it’s brand new. It’s also an environmentally friendly option. So, why would you replace instead of reglaze?

 

 

Many people ask us if they can resurface their wall or floor tiles. This is precisely why we have written this blog post. Read it to the end to find out why and how to refinish the tiles, as well as more information about the reglazing process. Truth be told, reglazing the tiles is not much different than reglazing the bathtub or shower. The good news is that you will save a lot of money simply by choosing to refinish instead of replace.

 

Reasons to Resurface the Tiles

Why would you want to resurface the tiles? This is surely one of the most important questions on your mind. After all, not many people know what a tile resurfacing means or what they should expect from it. Let us present you just some of the main reasons to refinish your wall tile or floor tiles:

• The most important benefit is, of course, savings. It can cost thousands of dollars to replace all the wall and floor tiles. Labor is very expensive these days. Reglazing the tiles will cost you just a fraction of the price.
• Another major benefit is the fact that you don’t have to do any construction work. You don’t have to pay for waste removal. You don’t have to spend days cleaning your home. No noise, no mess.
• The third major reason to refinish your tiles is that fact that you can change their color. In addition, when refinishing the floor tiles, you can choose to apply an anti-slip coating that will protect you and your loved ones from accidents.

Best Way to Bring Your Tiles Back to Life

Taking into consideration the benefits of reglazing, it’s pretty obvious that this is the way to go if you want to breathe new life into your wall and floor tiles. Reglazing tiles is a relatively simple procedure, but it should not be attempted by amateurs. Also, we advise against using do it yourself kits because they simply cannot pass the test of time. The coating will peel in a year or so, and you’ll end up hiring a professional to refinish the tiles the right way in any case.

Can You Change the Color?

A very interesting thing about refinishing wall and floor tiles is the fact that you can completely change the look of your bathroom, kitchen or hallways. How? During the reglazing process, we can add dyes to our solutions to change the color of the coating. Yes, we can change the color of your tiles without removing a single one of them.

You may be worried that the coating will peel off or discolor. This is a very reasonable concern. After all, you don’t want to repeat the procedure in one or two years. We want to assure you that our experts work with great care and attention to detail. The solutions, materials and chemicals we use to refinish the tiles are of the highest possible quality. We are talking about professional reglazing solutions, not do it yourself products.

The Reglazing Process

Most people don’t know what a refinishing is or how it’s done. You are not an expert, so we will do our best to explain the process in plain terms. Here is what a wall and floor tile refinishing process looks like:

1. First, the tiles are sanded down to remove the coating.
2. Then, all imperfections (small cracks, chips, etc.) are repaired by our expert. We want the outcome to be excellent.
3. One or two layers of primer are applied to the wall or floor tiles. These bonding agents will ensure the coating sticks perfectly.
4. One or two layers of coating are applied. The coating should be allowed to cure for 24-48 hours and the end result will be a glossy or matter finish (according to your requirements).

Remember, you should not clear the tiles for at least 5 days after the refinishing process to allow the coating to cure completely. Finally, our word of advice is to avoid using harsh chemicals like bleach on the reglazed tiles, no matter what. For the best tub reglazing in NYC, get in touch with us.

If you are looking to sell your house or apartment, you are most definitely interested in finding the best way to make your bathroom or kitchen more appealing. Studies show that these two rooms are very important for a potential buyer. However, there is a downside: the cost of renovating the bathroom and the kitchen. You probably know how much it costs to replace the fixtures and the tiles, not to mention the bathtub. However, the good news is that there is an easier, and much more affordable, way to increase the resale value of your home: reglazing. Let’s talk about it for a bit and show you just how important a proper reglazing job can be.

 

Your Bathroom and Kitchen Are Important

Trying to sell a house with old and rusty fixtures, cracked tiles, and worn out cabinets and countertops can be tough. Any potential buyer knows how much replacing them would cost. Also, the aspect of your bathroom and kitchen is probably not something that would please most buyers. This being said, you probably realize how important it is to make a good impression from the first moment a potential buyer enters the house.

Instead of spending tens of thousands of dollars on buying new fixtures, tiles, cabinets and countertops, why don’t you resurface them? Reglazing is the quick and affordable way to completely change the look of your bathroom and kitchen.

 

What Is Reglazing?

But what is reglazing? Basically, reglazing is the process of removing the surface layer of a fixture, tile or countertop and replacing it with a new layer of coating. The end result is an item that looks the same as a brand new one. The difference is that it is much cheaper to resurface the items instead of buying them and paying for labor to replace the old ones.

In addition, reglazing takes a lot less time and effort than replacing the items. You don’t have to worry about any demolition and construction work. You don’t have to pay for waste removal either, which saves you even more money. Because the reglazed fixtures look like new, your bathroom will look like it has been recently renovated.

 

Saving Money

You are probably interested to learn more about the money you save. Because you don’t have to buy new fixtures, tiles and countertops and pay for labor to install them, it’s much cheaper to reglaze. If you think about it, a budget bathtub is around $200-300. The labor can cost an additional $1,500. You can either pay $1,700-1,800 to replace the tub or reglaze the old one for $300-500. And this is only the bathtub. If you think about the sink, toilet, countertops, wall tiles, floor tiles, and cabinets, you can easily understand why resurfacing these items is the most affordable solution.

 

Improving the Looks of Your Property

Our tub refinishing service is exactly what you need if you want to completely change the look and feel of your bathroom and kitchen in no time. While replacing fixtures, tiles and countertops can take weeks of planning and work, reglazing them can take just a couple of days. Another very important aspect of our reglazing services is that you can customize the color of the fixtures and tiles. You can choose a combination of colors from our extensive palette, so the only limit is your imagination. Our contractors will make sure the end result is exactly as you envision it.

Upon your request, our experts can apply an anti-slip coating to the surface of your tub, shower stall, hot tub stairs, and even floor tiles. This will prevent slip and fall accidents that usually occur when the tiles are wet.

 

Hire the Pros

If you want top notch results, you should serious consider getting in touch with us. We have some of the best and most experienced reglazing professionals in the city. Our company has been in business for more than 10 years. Check out our before and after pictures to get a glimpse of what our experts can do for you if you want to increase the value of your apartment or house.

Of course, our company will give you a warranty for your peace of mind. The warranty can be transferred to the buyer, if you sell your house. In addition, our contractors can help you with refinishing all your cabinets and countertops, if you would like to avoid replacing them. We will bring your fixtures, tiles and cabinets and countertops back to life in no time. Let’s get in touch!

You’ve probably heard about bathtub reglazing services. If not, you should read our other blog posts, where you will find not only an in-depth description of the reglazing process, but also the most important benefits of resurfacing your tub, fixtures, tiles, countertops, and cabinets. In simple terms, reglazing a bathtub means removing the old coating (the enamel in most cases) and applying a new coating. The process is more complex, as you can imagine. However, the benefits of resurfacing a tub instead of replacing it are clear: you save a lot of money and protect the environment at the same time.

If you’ve been looking at the reglazing option, you’ve probably noticed that there are some refinishing kits that you can purchase online. They come with detailed instructions on how to reglaze your tub yourself. But are these DIY kits any good? Or do you need to hire a reglazing professional? Let’s find out!

 

Why Reglaze and Not Replace?

First, let’s start with a bit of background information on the topic of resurfacing. Most homeowners still think that the only way to have a modern bathroom is to replace the fixtures and the tiles. While this may have been true a few years back, now you have another option: reglazing. By reglazing the old tub, you will bring it back to life. It will look just like a brand new one and only an expert will be able to tell the difference (only if the resurfacing has been done by a pro). Here are some other reasons why reglazing is far better than replacing:

• Refinishing a tub protects the environment. You no longer have to throw away the old fixture and buy a new one. Also, the agents used during the refinishing process are eco-friendly.
• By resurfacing your bathtub, you avoid all the hassle of replacing it. No more construction work, no more debris, and no more expensive labor.
• You should refinish old porcelain hot tubs because many of them have been shown to contain dangerous levels of lead.
• Refinishing is a lot cheaper than replacing, pure and simple. Just think about how much labor costs these days and then add waste removal and other procedures that have to be completed to replace a bathtub.

 

Do It Yourself Reglazing Kits

There are several DIY tub reglazing kits you can purchase. Some of them are decent, while others simply don’t work as expected. If you’re lucky enough to get your hands on a decent kit, you won’t have much trouble reglazing your tub. However, you will need to buy some other things, including masking tape, gloves, and perhaps even something that can dry the coating (if your bathroom doesn’t have a window).

In addition to buying these things, you should also arm yourself with patience. This is probably the first time you are attempting to reglaze a tub, so don’t expect things to work like described in the manual. Also, don’t expect the results to be breathtaking. It’s not your fault; it’s just that the agents included in the kit are not professional-grade.

 

Professional Reglazing Services

A bathtub reglazing professional, on the other hand, does not require you to buy anything. Our contractors come fully prepared to handle any job, anywhere in the city. We will mask everything and even remove the grouting around the tub. Also, it’s worth noting that some of the agents used in the reglazing process are dangerous. Our contractors wear full face respirators when dealing with these substances.

Another benefit of working with a professional is the fact that we have access to professional-grade primers, as well as bonding and coating agents. No DIY kit can compare to our solutions. Our contractors are licensed and insured, and they know what they’re doing. This means that the reglazed tub will look like new for up to 8 years. The coating will not peel off and you won’t see any discoloration anywhere on the tub.

 

Should You Hire a Pro?

So, should you hire a professional for your tub reglazing project? If you don’t care about lasting results, you can simply use a DIY kit. You may be able to use the tub for another 12 months if you’re lucky to get a decent kit. If, however, you want a lasting solution (or an anti-slip coating) you should get in touch with us. Our contractors have years of experience reglazing bathtubs, so you can rest assured that we will do a great job. Just take a look at the before and after photos on our website to see the quality of our work.

If you are on the market for reglazing services, you might have heard about the non-slip coating. If you don’t know what reglazing (also called resurfacing or refinishing) is, check out our other blog posts. Simply put, refinishing is the process applied to bathroom fixtures, tiles and countertops to bring them to their original state. This means the surface is coated with an acrylic agent. The process is a bit more complicated than this, however,

During the reglazing process, our experts can apply a non-stick coating. This has many benefits, of course. Let’s discuss what this coating is, why it is useful, what it can be applied to, and how long it will last. Remember, all our work processes and products are environmentally friendly.

 

What Is a Non-Slip Coating?

Reglazing your floor tiles, bathtub and shower stall is not difficult to do. Our company has over 10 years of industry experience, so you can expect to get top notch results. But did you know that we can also help prevent accidents? Simply by applying a non-slip coating to areas that become slippery when wet, we can help you protects your loved ones from slips and falls.

The non-slip coating is a fine grid textured surface that prevents slip and fall accidents. It does not contain any lead and can be cleaned using chemical cleaners (it’s best to avoid bleach or highly aggressive agents though). Remember, this is not a bath mat, so it will be almost invisible to the naked eye.

 

What Can We Apply Non-slip Coating to?

Brooklyn bathtub reglazing company has an experienced team of refinishing experts. We can reglaze any fixture, any countertop, and any tile. In addition, we can quickly apply the non-slip coating to your bathtub, shower stall, or floor tiles. Also, we can coat the hot tub steps. Basically, we can apply the coating anywhere there is a risk of slipping. Surfaces that become slippery when wet are prime candidates.

The non-slip coating does not stain and is not damaged by water. Also, the coating is extremely durable, so you can expect it to last for up to 8 years. You don’t have to worry about scratches, so you can even use a wheelchair without having to worry about scratching the surface. However, this applies only to professional-grade coating and only if it has been applied by a professional.

 

Is It Expensive?

The good news is that applying an anti-slip coating to your bathtub, tiles, shower stall, or hot tub steps is not expensive. It is done during the refinishing process, as the final step. However, the price of the coating depends on the company that is doing the resurfacing. Some companies will charge outrageous prices just because you want to keep your loved ones safe.

Our company offers affordable anti-slip application services. In fact, we have been providing top quality customer service to Brooklyn homeowners for more than a decade. You can rest assured that you will get top quality results when you hire us. And besides, applying the anti-skid coating is not very difficult. After the coating on your tub, shower stall or tiles has cured, we will simply apply the anti-slip coating. That’s it; quick and simple.

 

Will It Peel Off?

Many people don’t realize that reglazing is designed to last for 8 years or more. Our anti-slip coating will not peel off, nor will it discolor. You can clean it just like you would clean the floor tiles or the tub. However, it’s worth noting that the coating is so durable because we use professional-grade agents. Do it yourself kits are usually unable to last more than one or two years without starting to degrade. Keep in mind that as soon as the surface degrades, it becomes slippery again. You want to make sure the coating is in perfect condition for as long as possible to protect yourself and your family from accidents.

 

Disadvantages of DIY Solutions

The main disadvantage of a DIY anti-skid coating is that it is nowhere as durable as our professional solutions. In addition, the coating may not be able to prevent slips, depending on the manufacturer and on who applied the agents. If you want to make sure you get top quality results from the coating, you should hire one of our reglazing experts. After all, it won’t cost you much to add the non-slip coating after the refinishing process is complete. Don’t take any risks and hire an expert to do a proper reglazing job.

Many homeowners and even companies and institutions have asked us how they can change the color of their tiles without spending ridiculous amounts of money on it. You’ve probably heard about bathtub reglazing and its benefits. But did you know that our company can also refinish wall and floor tiles? In addition, we can change the color of the tiles in the process. Let’s see why this is a better option than replacing all the tiles. Also, we will talk a bit about our innovative anti-slip coating and about regrouting.

 

The Cost of Replacing Wall and Floor Tiles

Let’s face it; replacing all the wall and floor tiles in your bathroom and kitchen can cost thousands of dollars. The tiles themselves are relatively expensive, especially if you opt for quality models. However, the labor is even more expensive. Replacing tiles is not something you want to do if you have a better option. It is also not something you want to do if you care about the environment.

If you think replacing tiles has an acceptable cost, don’t forget about the mess caused by all the demolition and construction work. Also, don’t forget the cost of waste removal. Bottom line, replacing all the tiles in your apartment or house can be a pretty expensive and time consuming endeavor.

 

A Better Way: Resurfacing Tiles

If you would like to avoid most of the costs we’ve talked about, you should seriously consider getting an affordable reglazing service. For instance, our company can quickly resurface wall and floor tiles for you and also change their color. There are several benefits to reglazing tiles, such as:

• There is no construction work involved, so you don’t have to worry about debris and waste removal.
• The resurfaced tiles will look just like new ones.
• Refinishing the tiles costs just a fraction of the price of replacing them.
• Resurfacing is an ecological process. You don’t have to send all the old tiles to the landfill.
• Resurfacing prolongs the life of your tiles by 6 to 8 years.
• We can apply an anti-slip coating to prevent accidents (more on this in the next section).

 

Preventing Slip and Fall Accidents

We’ve mentioned an anti-slip coating in the previous section. Basically, this coating has a fine texture that makes slipping almost impossible. Our anti-slip solution works best for areas that are very slippery when wet. For example, we can apply them to the floor tiles in your bathroom. We can also apply the coating to the bathtub. Don’t worry, the coating can be cleaned using regular cleaning solutions (avoid harsh chemicals though) and is also resistant to scratches and water. The coating will not peel off, so you can expect to have an anti-slip surface for years to come.

 

Regrouting the Tiles

We know that you are probably wondering about what happens to the grout when we resurface the wall and floor tiles. The good news is that, in most cases, we don’t need to remove the grout. We can simply spray the primer, bonding and coating agents over the old grouting. In some cases though, we may need to remove certain parts of the grout. Maybe we need to repair some chips in the tiles, or maybe our expert considers that he can’t do a good job with the grout in place.

In any case, our company will regrout your tiles after the reglazing process is finished. However, we need to wait for the coating to cure before we start grouting to make sure we don’t damage the reglazed tiles.

 

Final Considerations

Nowadays, more and more homeowners, companies and institutions turn to resurfacing services. Replacing tiles, fixtures, cabinets and countertops is expensive and requires a lot of time and effort. Reglazing, on the other hand, is fast and relatively inexpensive. You also avoid all the hassle of demolition and construction work. However, the quality of the resurfacing depends on the contractor.

It is very important to work with a reliable team. The experience of the contractor and the quality of the agents used during the refinishing procedure greatly influence the end result. If you want your bathroom or kitchen to look amazing, you need to work with the best reglazing contractors around. Our company has extensive industry experience, as well as a team of the best licensed and insured professionals. Get in touch with us and tell our experts a bit more about your project. Of course, the consultation is free. Rely on us and we will completely transform your bathroom or kitchen in no time!