Category: Uncategorized

We recently heard a story we found very interesting. It was related to refinishing, so it immediately piqued our interest. The story goes like this:
“I was looking for tub refinishing near me when I found some very worrying information about this procedure. Too many people are complaining that their tubs smell funny after the refinishing. Also, it looks like this treatment doesn’t last for more than a year or two. I no longer want to order the reglazing service and I suggest you avoid it as well.”
Yes, there can be problems with the inexpensive tub restoration service known as resurfacing (or reglazing, or refinishing). However, the problems are not due to the process itself, but due to the people who do the work.

Why Do Reglazing Problems Appear?

You’ve probably heard about reglazing, the cheap remodeling for your tub. Like the person above, you may have seen negative opinions about it. But the truth is that over 90% of the people who pay for a resurfacing service are satisfied with the results. The other 10% have probably hired the wrong person or have done the refinishing job themselves. One needs extensive experience and a very specific set of tools to do the job right. Only a trained, certified and insured professional should attempt to do a refinishing job.

The Most Common Problems

Here are the most common problems with resurfacing (any fixture, including sinks, toilets, urinals, tubs, and sinks):
• Insufficient coating thickness – this is the fault of the person who did the refinishing.
• Brittleness of the coating – the worker did not mix the substances correctly or in the required quantities.
• The substrate is visible – again, the worker did not apply several layers of coating, as required.
• Cracking – the mix was poorly formed and was not allowed to dry properly.
• Increased dry time or improper curing – the substances and materials used were the cheapest on the market.
As you can see, there is a simple answer to all of the most common resurfacing problems. The best way to avoid such problems is to hire a professional who has years of experience completing refinishing jobs successfully. Simple!

Since 2000, more than 14 bathroom professionals have died while performing various reglazing procedures. Reglazing seems like a very dangerous procedure, we agree. However, this may not be the case if one follows all the adequate safety best practices in the industry. If you would like to try this inexpensive tub restoration service, here is everything you need to know about the dangers.

What Is Methylene Chloride?

Reglazing can be performed on a wide variety of fixtures in your bathroom (tubs, toilets, urinals, sinks, etc.) and on wall tiles as well. This cheap remodeling for your tub uses some bonding agents, primers and finishing substances. In some cases, stripping products are used during the resurfacing process. Many of these substances contain a compound known as methylene chloride. The fumes that emanate from the tub during the reglazing procedure are dangerous. Methylene chloride can cause serious health problems and can even stop breathing in large enough concentrations.

The Importance of Ventilation

We understand you want to do a tub repair for rust stains and damage. However, don’t do it yourself! It is dangerous because even DIY reglazing kits contain substances with methylene chloride. If you do want to go ahead and do the refinishing procedure yourself, keep in mind that ventilation is extremely important. Under no circumstances should methylene chloride be allowed to accumulate in the small space that is your bathroom. If you have a feeling of intoxication or if you start feeling dizzy or fatigued, leave the bathroom at once!

How to Avoid the Danger

To keep yourself and your family safe, find a specialist who has experience doing tub reglazing in Westchester NY. He will come fully equipped to work in complete safety. Some of the things the worker can do to minimize the risks of the refinishing procedure is installing a local exhaust ventilation system, minimizing the spraying of substances, using good spill and leak control, using long-handled tools, and even leaving the bathroom after applying the substance that contains methylene chloride.
Bottom line, even though reglazing is a cost effective bathtub remodeling option, it should be done by a professional who has both experience and the necessary safety equipment. You should avoid using do-it-yourself kits because they can be just as dangerous as professional kits. Even if the levels of methylene chloride are low, this substance still poses a cancer threat to humans.

Everyone knows that refinishing is an inexpensive tub restoration service. But most people’s knowledge about refinishing (also known as reglazing or resurfacing) ends there. The truth is that there are many more benefits you are not aware of. Let’s take a look at some of the most important ones.

Save Money

Yes, you can do a cheap remodeling for your tub simply by refinishing it. While you should expect to pay upwards of $2,000 to replace the bathtub, resurfacing the tub shouldn’t set you back more than $500. For instance, the best Queens NY tub refinishing company charges from $350 to $500, depending on the complexity of the project.

Protect Yourself From Lead

Old porcelain bathtubs contain alarming quantities of lead. Your health may be at risk! Resurfacing basically encapsulates your entire tub, so the lead cannot affect you of your loved ones. A proper reglazing job will keep you protected for many years to come.

Extend the Life of Your Bathtub and Help the Environment

Resurfacing is a cost effective bathroom remodeling option. It will prolong the life of your tub by at least 10 years. And if you think about it, it is a very ecological process. The substances used are eco-friendly and you won’t throw away an object that you can refinish and continue using.

Change to Look of Your Bathroom

Resurfacing offers another benefit; one that you haven’t probably thought about. You can change the color of every fixture in your bathroom and of the wall tiles as well. During the last phase of the resurfacing procedure, you can choose the color of the finishing. And since you can reglaze anything from bathtubs and sinks to toilets and urinals, you can basically change the color of the entire bathroom.

Is It Worth It?

Considering the pretty large savings and the fact that resurfacing is a safe way to rejuvenate your bathtub, we would conclude that this procedure is worth it. After all, a quick resurfacing will prolong the life of your bathtub by many more years.

If you are interested in resurfacing your bathtub, you need to know a few things. These questions may already be on your mind, so read to the end to get the most reliable answers from the best Bronx tub refinishing company. And remember, refinishing is an inexpensive tub restoration service that can be applied to other items in your bathroom as well. For instance, resurfacing can be applied to urinals, toilets, sinks, and even wall tiles.

Is Resurfacing the Same as Reglazing?

If you are looking to do a tub repair for rust stains and damage, you’ve probably came across these two terms: reglazing and resurfacing. Are they the same thing? Yes, they are. Resurfacing and reglazing refer to the process of redoing the coating on the tub. After the refinishing, the surface will look like enamel once again.

Does Your Tub Support Reglazing?

This is a good question to ask when you’re looking for cheap remodeling for your tub. The answer is a resounding “Yes!” Acrylic, cast iron, plastic, and even steel bathtubs all behave very well during resurfacing. You don’t have to worry about a thing. No matter what material your bathtub is made out of, there is a solution.

Should You Do the Resurfacing Yourself?

Even though a resurfacing of surfaces sounds like an easy thing to do, don’t do it yourself! The bonding agents, primers and finishing substances all contain various chemicals. The fumes that emanate from the tub during the refinishing process are dangerous. You should never risk your health, or the health of your loved ones, just to save a couple of bucks. A reglazing typically costs $350 to $500. It’s not worth the risk to try to do it yourself, trust us!

You might have heard about a resurfacing lasting for 10 to 15 years. However, there are cases where the resurfacing doesn’t even last for 5 years. Truth be told, many people complain that the refinishing job has been done poorly by the expert. But is this really true? What most homeowners don’t know is that you need to change the way you clean your fixtures after the resurfacing. So let’s talk about what you can and cannot use while cleaning tubs, sinks, urinals, toilets, and wall tiles that have been reglazed.

Resurfacing Is Designed to Last

Contrary to what you may have heard or read on the Internet, resurfacing is actually designed to last. No Brooklyn tub refinishing company would jeopardize its reputation just to get more repeat clients. No expert will do a mediocre job hoping to reglaze the fixture again in a year or two. You can expect a bathtub that has been undergone a resurfacing procedure to remain in perfect condition for over 10 years – but only if you take care of it.

Care And Maintenance Best Practices

Resurfacing is an inexpensive tub restoration service, but there are some things you need to watch out for. First, you need to avoid using any solutions that contain chlorine or ammonia to clean the tub. Second, never use any abrasive cleaning solutions or cleaning materials. And third, do not use power washing or steam cleaning under any circumstances. If you follow these simple rules, the resurfacing will last for many years.

To clean the bathtub, use a cleaner like Formula 409 or Scrubbing Bubbles. Spray evenly on the surface of the bathtub, let it sit for around 5 minutes, rub the tub with microfiber cloth, and then rinse with warm water. Remember that resurfacing the tub again will cost you money, so be careful how you maintain it!

The process of resurfacing of surfaces has been around for some time. And now, you can use resurfacing to completely rejuvenate your bathroom fixtures (sinks, toilets, urinals, tubs, etc.). You can even restore all your bathroom wall tiles to their original shine and color. Today, the oldest tub reglazing company in New York responds to the frequently asked questions about resurfacing.

Why Resurfacing?

Resurfacing is an inexpensive tub restoration service. It will cost you around 25% of the price of installing a new bathtub. Sometimes even less than 25%. After resurfacing, your tub will look and feel just like a new one.

How Long Does Resurfacing Last?

A resurfacing job done by an experienced professional employed by a responsible company can last for quite a lot of time. All you have to do is avoid cleaning the fixtures with abrasive substances or materials and avoid anything that contains chlorine or ammonia.

How Long Does Resurfacing Take?

A resurfacing job takes around 4 to 6 hours from start to finish. You then need to let the finishing dry for another 24 to 48 hours. In other words, your tub can be safely used in two days.

Any Differences Between Refinishing, Reglazing and Resurfacing?

No, resurfacing, refinishing and reglazing are basically the same thing. It is a cost effective bathtub remodeling method. The process is exactly the same, only the name differs.

Is Resurfacing Dangerous?

Absolutely not! The substances and solutions used during the resurfacing project are indeed dangerous, but they are mixed and applied by a trained professional who uses all the necessary safety equipment. After the finishing dries, it becomes 100% harmless to humans and pets. By resurfacing, you can do a complete tub repair for rust stains and damage – 100% safe!

Who would have thought you can have a brand new bathtub without all the mess involved with replacing it? It sounds impossible, we know! But nowadays, with a professional reglazing job, you can bring your tub back to its former glory. The reglazing procedure will not only remove all the rust, cracks, grime and stains, it will also make your bathtub white and shiny again. In other words, your tub will once again look like brand new.

What Can You Reglaze?

Reglazing is not a difficult process. It involves the use of bonding agents, primers and finishing substances to get a hard coating that resembles enamel. This inexpensive tub restoration service can be used to restore all kinds of fixtures, including tubs, toilets, urinals, and sinks. You can even do a reglazing job on wall tiles. This makes reglazing a cost effective bathroom remodeling option. All types of tubs are prime candidates for refinishing, including acrylic, cast iron, steel, and plastic tubs. By resurfacing the tub, you can continue using it for at least 10 more years. You don’t have to throw it away and install a new bathtub (it costs over $2,000 to do so).

Changing the Color Of Your Tub

Reglazing is also useful if you want to change the appearance of your bathroom. The finishing is applied in the color you choose. This means that by reglazing the fixtures, you can easily change their color and bring them back to their former glory at the same time. This process of resurfacing of surfaces is safe. After the finishing dries, you can use the bathroom as you would normally do. There is just one thing you must keep in mind: you need to hire a Westchester NY bathtub reglazing professional to do the job. Reglazing may sound simple, but it requires years of experience and a comprehensive set of tools to do correctly!

If you are looking for an inexpensive tub restoration service, you already know that you have several alternatives. All of them are better, and much more affordable, than replacing the bathtub. The top two options for you are reglazing and tub liners. But which one is better? Should you pay a Bronx bathtub reglazing service for a refinishing job? Or perhaps a tub liner would be better.

What Is Tub Reglazing?

Tub reglazing is a pretty simple thing, but only if it is done by a trained and experienced professional. Here is what is done during a reglazing procedure:
The fixture is sanded thoroughly. You can reglaze anything, including urinals, tubs, sinks, toilets, and even wall tiles.
1. Cracks and chips are repaired and rust is removed.
2. A bonding agent is applied evenly on the surface.
3. A primer is applied.
4. The reglazing finishing is applied. The mix is sprayed evenly onto the surface of the tub.
5. You then wait for the finishing to dry (24 to 48 hours).
Reglazing has excellent results. The finishing will be like the original enamel on your tub.

What Are Bathtub Liners?

A bathtub liner is custom made for your tub. In most cases, this means somebody has to come and measure the bathtub, and then a custom liner has to be manufactured. The liner is placed over the tub and sealed so that water, soap and dirt can’t get underneath it. Unlike reglazing, the use of a liner does not get rid of rust, grime, stains, or cracks. It just covers them.

Which Is Better?

If you are looking after cheap remodeling for your tub, reglazing is clearly the best option. It can prolong the life of the tub by another 10 years. And with this inexpensive tub restoration service, you effectively get rid of all stains, cracks and rust. Let’s not forget that reglazing is cheaper than ordering a bathtub liner. Moreover, the finished appearance is much better after a professional reglazing.

Are you considering replacing the bathtub? Or even worse, are you considering replacing all the fixtures in your bathroom? We know that rust, stains, grime, chips, and cracks look awful. However, there is a better option – and one that is also sustainable: refinishing. By refinishing the tub, you will make it look like brand new. Yes, the finishing will feel and look exactly like the original enamel. And no, it will not cost a fortune! Refinishing is gaining more and more traction with homeowners nowadays exactly because it is an inexpensive tub restoration service. How much can you save with a refinishing project? Let’s find out!

An Affordable Solution for Your Bathroom

If you are looking for cheap remodeling for your tub, refinishing is everything you need. The various bonding agents, primers and finishing materials all work together to form a coating that resembles the original coating of the tub. And did you know that refinishing can be applied to toilets, urinals, sinks, and even wall tiles? Yes, refinishing has the potential to make your bathroom a cool, modern place once again. Now let’s talk about savings. Refinishing a tub costs less than $500. Replacing the bathtub usually costs more than $2,500, labor and materials included. So by choosing refinishing over replacing you save $2,000. Furthermore, reglazing your fixtures helps the environment. Now, these products no longer have to end up in the landfill.

Who Can Help You?

When you want to do tub repair for rust stains and damage, refinishing is your best option. During the refinishing process, the fixture is sanded and all rust is removed. All the cracks and chips are repaired before the bonding agent and the primer are applied. The end result is a perfect coating. No more grime, no more cracks, no more rust, no more stains! But to get the best possible results from the refinishing job, you need a professional who has extensive experience doing tub reglazing in Bronx, NY. When you work with an expert, you also get guarantees and a warranty. You are 100% protected!

Are you tired of seeing those cracks and chips on your bathtub? Or perhaps you want to get rid of all the grime and stains on the tub. Truth be told, an ugly tub can be quite uninviting. Long gone are the days when all you wanted was to get home and sink in the tub. We have some good news for you though. You can bring your tub back to life, and you don’t have to spend $2,000 to do it (the average cost of replacing a bathtub). By refinishing the tub, you can make it look and feel like new. And did you know that refinishing can be performed on all types of tubs, including acrylic, plastic and fiberglass? Even better, refinishing can be used on urinals, toilets, sinks and even wall tiles. That’s right, you can remodel your bathroom entirely!

How Refinishing Works

Refinishing is a cost effective bathtub remodeling option. While replacing the tub would typically cost more than $2,000, a refinishing job can be done for as little as $350. These are some serious savings. Moreover, refinishing is an eco-friendly, inexpensive tub restoration service. You don’t have to throw the old, rusty bathtub away. All you have to do is restore it to its original condition with a professional refinishing job. During the procedure, the surface is sanded and then a layer of bonding agent is applied. During the next step, the finishing (coating) is applied by spraying. After 24-48 hours of drying, the surface of the tub will be in mint condition and will look and feel like the original enamel.

Refinishing Plastic and Fiberglass Tubs

Refinishing can be done on any tub, no matter what material it’s made of. So yes, you can definitely reglaze plastic and fiberglass tubs. They can be sanded and the bonding agent works just fine on them. For the best results, you will have to use the services of a bathroom professional. The refinishing process is pretty complex and requires some specific tools and skills. We recommend you find the best bathtub reglazing service in New York and get in touch with their experts. Keep in mind that the quality of the work, as well as the end result, depends on the skills and knowledge of the professional who does the refinishing job. For top quality, work with the best!