Many people ask us if they can resurface their wall or floor tiles. This is precisely why we have written this blog post. Read it to the end to find out why and how to refinish the tiles, as well as more information about the reglazing process. Truth be told, reglazing the tiles is not much different than reglazing the bathtub or shower. The good news is that you will save a lot of money simply by choosing to refinish instead of replace.

 

Reasons to Resurface the Tiles

Why would you want to resurface the tiles? This is surely one of the most important questions on your mind. After all, not many people know what a tile resurfacing means or what they should expect from it. Let us present you just some of the main reasons to refinish your wall tile or floor tiles:

• The most important benefit is, of course, savings. It can cost thousands of dollars to replace all the wall and floor tiles. Labor is very expensive these days. Reglazing the tiles will cost you just a fraction of the price.
• Another major benefit is the fact that you don’t have to do any construction work. You don’t have to pay for waste removal. You don’t have to spend days cleaning your home. No noise, no mess.
• The third major reason to refinish your tiles is that fact that you can change their color. In addition, when refinishing the floor tiles, you can choose to apply an anti-slip coating that will protect you and your loved ones from accidents.

Best Way to Bring Your Tiles Back to Life

Taking into consideration the benefits of reglazing, it’s pretty obvious that this is the way to go if you want to breathe new life into your wall and floor tiles. Reglazing tiles is a relatively simple procedure, but it should not be attempted by amateurs. Also, we advise against using do it yourself kits because they simply cannot pass the test of time. The coating will peel in a year or so, and you’ll end up hiring a professional to refinish the tiles the right way in any case.

Can You Change the Color?

A very interesting thing about refinishing wall and floor tiles is the fact that you can completely change the look of your bathroom, kitchen or hallways. How? During the reglazing process, we can add dyes to our solutions to change the color of the coating. Yes, we can change the color of your tiles without removing a single one of them.

You may be worried that the coating will peel off or discolor. This is a very reasonable concern. After all, you don’t want to repeat the procedure in one or two years. We want to assure you that our experts work with great care and attention to detail. The solutions, materials and chemicals we use to refinish the tiles are of the highest possible quality. We are talking about professional reglazing solutions, not do it yourself products.

The Reglazing Process

Most people don’t know what a refinishing is or how it’s done. You are not an expert, so we will do our best to explain the process in plain terms. Here is what a wall and floor tile refinishing process looks like:

1. First, the tiles are sanded down to remove the coating.
2. Then, all imperfections (small cracks, chips, etc.) are repaired by our expert. We want the outcome to be excellent.
3. One or two layers of primer are applied to the wall or floor tiles. These bonding agents will ensure the coating sticks perfectly.
4. One or two layers of coating are applied. The coating should be allowed to cure for 24-48 hours and the end result will be a glossy or matter finish (according to your requirements).

Remember, you should not clear the tiles for at least 5 days after the refinishing process to allow the coating to cure completely. Finally, our word of advice is to avoid using harsh chemicals like bleach on the reglazed tiles, no matter what. For the best tub reglazing in NYC, get in touch with us.

If you are looking to sell your house or apartment, you are most definitely interested in finding the best way to make your bathroom or kitchen more appealing. Studies show that these two rooms are very important for a potential buyer. However, there is a downside: the cost of renovating the bathroom and the kitchen. You probably know how much it costs to replace the fixtures and the tiles, not to mention the bathtub. However, the good news is that there is an easier, and much more affordable, way to increase the resale value of your home: reglazing. Let’s talk about it for a bit and show you just how important a proper reglazing job can be.

 

Your Bathroom and Kitchen Are Important

Trying to sell a house with old and rusty fixtures, cracked tiles, and worn out cabinets and countertops can be tough. Any potential buyer knows how much replacing them would cost. Also, the aspect of your bathroom and kitchen is probably not something that would please most buyers. This being said, you probably realize how important it is to make a good impression from the first moment a potential buyer enters the house.

Instead of spending tens of thousands of dollars on buying new fixtures, tiles, cabinets and countertops, why don’t you resurface them? Reglazing is the quick and affordable way to completely change the look of your bathroom and kitchen.

 

What Is Reglazing?

But what is reglazing? Basically, reglazing is the process of removing the surface layer of a fixture, tile or countertop and replacing it with a new layer of coating. The end result is an item that looks the same as a brand new one. The difference is that it is much cheaper to resurface the items instead of buying them and paying for labor to replace the old ones.

In addition, reglazing takes a lot less time and effort than replacing the items. You don’t have to worry about any demolition and construction work. You don’t have to pay for waste removal either, which saves you even more money. Because the reglazed fixtures look like new, your bathroom will look like it has been recently renovated.

 

Saving Money

You are probably interested to learn more about the money you save. Because you don’t have to buy new fixtures, tiles and countertops and pay for labor to install them, it’s much cheaper to reglaze. If you think about it, a budget bathtub is around $200-300. The labor can cost an additional $1,500. You can either pay $1,700-1,800 to replace the tub or reglaze the old one for $300-500. And this is only the bathtub. If you think about the sink, toilet, countertops, wall tiles, floor tiles, and cabinets, you can easily understand why resurfacing these items is the most affordable solution.

 

Improving the Looks of Your Property

Our tub refinishing service is exactly what you need if you want to completely change the look and feel of your bathroom and kitchen in no time. While replacing fixtures, tiles and countertops can take weeks of planning and work, reglazing them can take just a couple of days. Another very important aspect of our reglazing services is that you can customize the color of the fixtures and tiles. You can choose a combination of colors from our extensive palette, so the only limit is your imagination. Our contractors will make sure the end result is exactly as you envision it.

Upon your request, our experts can apply an anti-slip coating to the surface of your tub, shower stall, hot tub stairs, and even floor tiles. This will prevent slip and fall accidents that usually occur when the tiles are wet.

 

Hire the Pros

If you want top notch results, you should serious consider getting in touch with us. We have some of the best and most experienced reglazing professionals in the city. Our company has been in business for more than 10 years. Check out our before and after pictures to get a glimpse of what our experts can do for you if you want to increase the value of your apartment or house.

Of course, our company will give you a warranty for your peace of mind. The warranty can be transferred to the buyer, if you sell your house. In addition, our contractors can help you with refinishing all your cabinets and countertops, if you would like to avoid replacing them. We will bring your fixtures, tiles and cabinets and countertops back to life in no time. Let’s get in touch!

You’ve probably heard about bathtub reglazing services. If not, you should read our other blog posts, where you will find not only an in-depth description of the reglazing process, but also the most important benefits of resurfacing your tub, fixtures, tiles, countertops, and cabinets. In simple terms, reglazing a bathtub means removing the old coating (the enamel in most cases) and applying a new coating. The process is more complex, as you can imagine. However, the benefits of resurfacing a tub instead of replacing it are clear: you save a lot of money and protect the environment at the same time.

If you’ve been looking at the reglazing option, you’ve probably noticed that there are some refinishing kits that you can purchase online. They come with detailed instructions on how to reglaze your tub yourself. But are these DIY kits any good? Or do you need to hire a reglazing professional? Let’s find out!

 

Why Reglaze and Not Replace?

First, let’s start with a bit of background information on the topic of resurfacing. Most homeowners still think that the only way to have a modern bathroom is to replace the fixtures and the tiles. While this may have been true a few years back, now you have another option: reglazing. By reglazing the old tub, you will bring it back to life. It will look just like a brand new one and only an expert will be able to tell the difference (only if the resurfacing has been done by a pro). Here are some other reasons why reglazing is far better than replacing:

• Refinishing a tub protects the environment. You no longer have to throw away the old fixture and buy a new one. Also, the agents used during the refinishing process are eco-friendly.
• By resurfacing your bathtub, you avoid all the hassle of replacing it. No more construction work, no more debris, and no more expensive labor.
• You should refinish old porcelain hot tubs because many of them have been shown to contain dangerous levels of lead.
• Refinishing is a lot cheaper than replacing, pure and simple. Just think about how much labor costs these days and then add waste removal and other procedures that have to be completed to replace a bathtub.

 

Do It Yourself Reglazing Kits

There are several DIY tub reglazing kits you can purchase. Some of them are decent, while others simply don’t work as expected. If you’re lucky enough to get your hands on a decent kit, you won’t have much trouble reglazing your tub. However, you will need to buy some other things, including masking tape, gloves, and perhaps even something that can dry the coating (if your bathroom doesn’t have a window).

In addition to buying these things, you should also arm yourself with patience. This is probably the first time you are attempting to reglaze a tub, so don’t expect things to work like described in the manual. Also, don’t expect the results to be breathtaking. It’s not your fault; it’s just that the agents included in the kit are not professional-grade.

 

Professional Reglazing Services

A bathtub reglazing professional, on the other hand, does not require you to buy anything. Our contractors come fully prepared to handle any job, anywhere in the city. We will mask everything and even remove the grouting around the tub. Also, it’s worth noting that some of the agents used in the reglazing process are dangerous. Our contractors wear full face respirators when dealing with these substances.

Another benefit of working with a professional is the fact that we have access to professional-grade primers, as well as bonding and coating agents. No DIY kit can compare to our solutions. Our contractors are licensed and insured, and they know what they’re doing. This means that the reglazed tub will look like new for up to 8 years. The coating will not peel off and you won’t see any discoloration anywhere on the tub.

 

Should You Hire a Pro?

So, should you hire a professional for your tub reglazing project? If you don’t care about lasting results, you can simply use a DIY kit. You may be able to use the tub for another 12 months if you’re lucky to get a decent kit. If, however, you want a lasting solution (or an anti-slip coating) you should get in touch with us. Our contractors have years of experience reglazing bathtubs, so you can rest assured that we will do a great job. Just take a look at the before and after photos on our website to see the quality of our work.

If you are on the market for reglazing services, you might have heard about the non-slip coating. If you don’t know what reglazing (also called resurfacing or refinishing) is, check out our other blog posts. Simply put, refinishing is the process applied to bathroom fixtures, tiles and countertops to bring them to their original state. This means the surface is coated with an acrylic agent. The process is a bit more complicated than this, however,

During the reglazing process, our experts can apply a non-stick coating. This has many benefits, of course. Let’s discuss what this coating is, why it is useful, what it can be applied to, and how long it will last. Remember, all our work processes and products are environmentally friendly.

 

What Is a Non-Slip Coating?

Reglazing your floor tiles, bathtub and shower stall is not difficult to do. Our company has over 10 years of industry experience, so you can expect to get top notch results. But did you know that we can also help prevent accidents? Simply by applying a non-slip coating to areas that become slippery when wet, we can help you protects your loved ones from slips and falls.

The non-slip coating is a fine grid textured surface that prevents slip and fall accidents. It does not contain any lead and can be cleaned using chemical cleaners (it’s best to avoid bleach or highly aggressive agents though). Remember, this is not a bath mat, so it will be almost invisible to the naked eye.

 

What Can We Apply Non-slip Coating to?

Brooklyn bathtub reglazing company has an experienced team of refinishing experts. We can reglaze any fixture, any countertop, and any tile. In addition, we can quickly apply the non-slip coating to your bathtub, shower stall, or floor tiles. Also, we can coat the hot tub steps. Basically, we can apply the coating anywhere there is a risk of slipping. Surfaces that become slippery when wet are prime candidates.

The non-slip coating does not stain and is not damaged by water. Also, the coating is extremely durable, so you can expect it to last for up to 8 years. You don’t have to worry about scratches, so you can even use a wheelchair without having to worry about scratching the surface. However, this applies only to professional-grade coating and only if it has been applied by a professional.

 

Is It Expensive?

The good news is that applying an anti-slip coating to your bathtub, tiles, shower stall, or hot tub steps is not expensive. It is done during the refinishing process, as the final step. However, the price of the coating depends on the company that is doing the resurfacing. Some companies will charge outrageous prices just because you want to keep your loved ones safe.

Our company offers affordable anti-slip application services. In fact, we have been providing top quality customer service to Brooklyn homeowners for more than a decade. You can rest assured that you will get top quality results when you hire us. And besides, applying the anti-skid coating is not very difficult. After the coating on your tub, shower stall or tiles has cured, we will simply apply the anti-slip coating. That’s it; quick and simple.

 

Will It Peel Off?

Many people don’t realize that reglazing is designed to last for 8 years or more. Our anti-slip coating will not peel off, nor will it discolor. You can clean it just like you would clean the floor tiles or the tub. However, it’s worth noting that the coating is so durable because we use professional-grade agents. Do it yourself kits are usually unable to last more than one or two years without starting to degrade. Keep in mind that as soon as the surface degrades, it becomes slippery again. You want to make sure the coating is in perfect condition for as long as possible to protect yourself and your family from accidents.

 

Disadvantages of DIY Solutions

The main disadvantage of a DIY anti-skid coating is that it is nowhere as durable as our professional solutions. In addition, the coating may not be able to prevent slips, depending on the manufacturer and on who applied the agents. If you want to make sure you get top quality results from the coating, you should hire one of our reglazing experts. After all, it won’t cost you much to add the non-slip coating after the refinishing process is complete. Don’t take any risks and hire an expert to do a proper reglazing job.

Many homeowners and even companies and institutions have asked us how they can change the color of their tiles without spending ridiculous amounts of money on it. You’ve probably heard about bathtub reglazing and its benefits. But did you know that our company can also refinish wall and floor tiles? In addition, we can change the color of the tiles in the process. Let’s see why this is a better option than replacing all the tiles. Also, we will talk a bit about our innovative anti-slip coating and about regrouting.

 

The Cost of Replacing Wall and Floor Tiles

Let’s face it; replacing all the wall and floor tiles in your bathroom and kitchen can cost thousands of dollars. The tiles themselves are relatively expensive, especially if you opt for quality models. However, the labor is even more expensive. Replacing tiles is not something you want to do if you have a better option. It is also not something you want to do if you care about the environment.

If you think replacing tiles has an acceptable cost, don’t forget about the mess caused by all the demolition and construction work. Also, don’t forget the cost of waste removal. Bottom line, replacing all the tiles in your apartment or house can be a pretty expensive and time consuming endeavor.

 

A Better Way: Resurfacing Tiles

If you would like to avoid most of the costs we’ve talked about, you should seriously consider getting an affordable reglazing service. For instance, our company can quickly resurface wall and floor tiles for you and also change their color. There are several benefits to reglazing tiles, such as:

• There is no construction work involved, so you don’t have to worry about debris and waste removal.
• The resurfaced tiles will look just like new ones.
• Refinishing the tiles costs just a fraction of the price of replacing them.
• Resurfacing is an ecological process. You don’t have to send all the old tiles to the landfill.
• Resurfacing prolongs the life of your tiles by 6 to 8 years.
• We can apply an anti-slip coating to prevent accidents (more on this in the next section).

 

Preventing Slip and Fall Accidents

We’ve mentioned an anti-slip coating in the previous section. Basically, this coating has a fine texture that makes slipping almost impossible. Our anti-slip solution works best for areas that are very slippery when wet. For example, we can apply them to the floor tiles in your bathroom. We can also apply the coating to the bathtub. Don’t worry, the coating can be cleaned using regular cleaning solutions (avoid harsh chemicals though) and is also resistant to scratches and water. The coating will not peel off, so you can expect to have an anti-slip surface for years to come.

 

Regrouting the Tiles

We know that you are probably wondering about what happens to the grout when we resurface the wall and floor tiles. The good news is that, in most cases, we don’t need to remove the grout. We can simply spray the primer, bonding and coating agents over the old grouting. In some cases though, we may need to remove certain parts of the grout. Maybe we need to repair some chips in the tiles, or maybe our expert considers that he can’t do a good job with the grout in place.

In any case, our company will regrout your tiles after the reglazing process is finished. However, we need to wait for the coating to cure before we start grouting to make sure we don’t damage the reglazed tiles.

 

Final Considerations

Nowadays, more and more homeowners, companies and institutions turn to resurfacing services. Replacing tiles, fixtures, cabinets and countertops is expensive and requires a lot of time and effort. Reglazing, on the other hand, is fast and relatively inexpensive. You also avoid all the hassle of demolition and construction work. However, the quality of the resurfacing depends on the contractor.

It is very important to work with a reliable team. The experience of the contractor and the quality of the agents used during the refinishing procedure greatly influence the end result. If you want your bathroom or kitchen to look amazing, you need to work with the best reglazing contractors around. Our company has extensive industry experience, as well as a team of the best licensed and insured professionals. Get in touch with us and tell our experts a bit more about your project. Of course, the consultation is free. Rely on us and we will completely transform your bathroom or kitchen in no time!

If you are searching for a replacement for your bathtub, you may be interested in learning about a different option. Did you know that nowadays you can simply reglaze the old tub and make it look like brand new? While there are some DIY options on the market, you are advised to hire a company for the job. We will explain why in a bit. The truth is that most people still think that replacing the tub is the only viable option. In this blog post, we will show you that this is no longer the case. Learn more about the benefits of tub resurfacing and see why our experts are exactly what you need if you want to save money.

 

Is Tub Replacement Your Only Option?

So, is tub replacement your only option? While many bathtub and Jacuzzi manufacturers will try to convince you that it is, this is far from being the truth. You can simply reglaze the tub and make it look like new. You may be worried that the new coating won’t pass the test of time. Or maybe you think that the refinished tub will discolor. If the reglazing has been done by an expert and if the agents he used are professional, you don’t have to worry about peeling or discoloration. And no, you don’t have to worry about harmful chemicals either.

Reglazing your bathtub is much cheaper than resurfacing it. A typical reglazing job costs between $300 and $600. You may be able to buy a new tub for around $200, if you are not looking for a quality fixture. So, how is reglazing going to save you money in this case? Did you consider all the additional costs of replacing the tub? Labor expenses often set homeowners back over $1,500. We are talking about construction work in most cases, so you will also have to deal with all the mess this can cause. Refinishing the tub, on the other hand, doesn’t generate any debris. At most, we will remove the old grouting and regrout the hot tub afterwards.

 

What If You Want to Change the Color of the Tub?

But what if you want to change the color of the tub? Perhaps you’ve replaced all the wall and floor tiles and the old tub color doesn’t work for you anymore. No problem; our experts can change the color of your fixture during the resurfacing process. You just pick one of the colors in our palette and we will take care of everything for you.

And did you know that our contractors can reglaze other fixtures (sink, Jacuzzi, shower stall, etc.) for you? Or that we can resurface wall and floor tiles? Truth be told, our team can completely change the look and feel of your bathroom in no time and without doing any demolition work.

 

The Professional Bathtub Reglazing Process

Here at Brooklyn Tub Reglazing, we take great pride in our ability to reglaze a fixture or the tiles in record time. Our experts use professional-grade bonding and coating agents, so you can rest assured that the coating will no peel off for years. Our company will also give you a warranty for your peace of mind.

Not only can we reglaze the tub, shower stall or wall tiles, we can also prevent slip and fall accidents. Our contractors will apply an anti-slip coating that makes skipping almost impossible. This is especially useful for areas that are frequently accessed by elderly people.

 

Is Bathtub Refinishing Worth It?

But is it bathtub reglazing worth the effort? We believe it is, and so do thousands of our clients in Brooklyn. Over the years, we have demonstrated that resurfacing can save our clients thousands of dollars. You can simply take a look at our Before and After section to see for yourself how your bathtub can look after our team resurfaces it. Those are real pictures of real tubs.

 

Can You Do It Yourself?

The last thing we want to talk about is the DIY trend. While there are many things you can certainly do yourself around the house, reglazing a tub is not one of them. First, DIY resurfacing kits are nowhere near as effective as our professional solutions. The coating will just peek off in a couple of months. Second, the etching, bonding and coating agents that are used during the refinishing process are dangerous. You need to know what you’re doing to handle them safely. And third, a DIY kit doesn’t cost much less than a reglazing procedure performed by a skilled contractor. It simply makes no sense to try to do this procedure yourself. Get in touch with us to learn more.

Did you know that our company can reglaze your tiles, not just your fixtures? Few people know that during the refinishing process, the color of the tiles and fixtures can be changed. We have an entire palette of colors you can choose from, in fact. And besides, resurfacing yields better results than applying decals or painting the tiles.

Let’s talk a bit about resurfacing tiles and all the benefits this can bring to your bathroom or kitchen. And remember, it’s always better to reglaze instead of replace. You will not only be saving money, but also protecting the environment. By not sending all your tiles to the landfill, you can really make a difference.

 

Yes, Tiles Can Be Reglazed

You now know that tiles can be refinished, but you probably want to work with the best company in your area. We are the NYC bathtub reglazing company to call if you need this kind of service. Our professionals have years of experience resurfacing tiles of all sizes and colors. Of course, we can refinish both wall tiles and floor tiles. In addition to bringing all your tiles back to life, our experts can also apply an anti-slip coating to floor tiles. This coating makes it almost impossible to slip, even when the tiles are wet.

In addition to resurfacing the tiles, we recommend you refinish the fixtures and even the cabinets. If you want to transform your old bathroom into a modern one, reglazing the fixtures is almost a must. In addition, everything will look like brand new. Of course, the price of reglazing everything is much lower than the price of replacing the fixtures, tiles and cabinets. Why replace when you can reglaze?

 

Benefits of Refinishing Tiles

Refinishing the wall and floor tiles has many benefits. In addition to saving money, here are some of the benefits of refinishing the tiles:

• You can change their color without replacing them.
• There is no construction work involved, so you don’t need to worry about cleaning up.
• The resurfaced tiles will be just as shiny as new ones.
• We can apply an anti-slip coating to floor tiles to prevent accidents.
• Cleaning the tiles becomes much easier.
• The high-gloss surface is just as strong as the original coating.

As you can see, there are plenty of benefits to reglazing your wall and floor tiles. And don’t forget: resurfacing is much cheaper than replacing. You don’t have to send the old tiles to the landfill, so resurfacing is an eco-friendly process.

 

The Reglazing Process

You are probably wondering what the process of reglazing the tiles involves. Don’t worry about it; there is no construction work involved. In other words, you don’t have to worry about our contractors making a mess in your bathroom or kitchen. Here is the basic process of resurfacing wall and floor tiles:

1. The area around the tiles is masked to prevent the agents from getting on any of the surrounding surfaces.
2. First, the grouting is removed, but only if it is necessary. In some cases, the tiles don’t need regrouting.
3. All the chips, dents and cracks are repaired. We want to makes sure the tiles look like brand new after we’re done resurfacing them.
4. The surface of the tiles if thoroughly cleaned. In some cases, we may even sand down the tiles.
5. An etching agent is applied so the surface of the tiles becomes porous. This ensures the bonding agent is properly absorbed.
6. The bonding agent is sprayed carefully over each tile uniformly.
7. After about 30 minutes, the coating agent is applied. If necessary, a second layer of coating may be applied.
8. The coating should be left to cure for up to a week. This means you should not use any cleaning solutions on the tiles.

 

Who Can Reglaze Your Tiles?

Resurfacing wall and floor tiles is a great way to completely change the look and feel of a bathroom or kitchen. However, for the best results, always contract an experienced professional. Our company has been in the reglazing industry for over 10 years, so all our contractors have extensive experience with tile resurfacing.

During the reglazing process, we can change color of the wall and floor tiles. You can pick one or more colors from our palette and our expert will make sure the end result will be exactly how you envision it. We use professional-grade agents and equipment, not DIY solutions. This means the resurfaced tiles will maintain their shine for up to 8 years. Also, you can rest assured that the coating will not peel off or discolor anytime soon. Of course, you get a warranty from our company for your peace of mind.

Did you know that nowadays, more and more people are choosing to reglaze their fixtures, tiles and cabinets instead of replacing them? After all, it makes perfect sense to restore your items to their former glory than to buy new ones. However, many people don’t know why refinishing is a better choice. To shed some light on this, we will present to you the top 7 benefits of resurfacing a fixture. We will also show you why reglazing is an ecologically friendly process. Read on!

 

Reglaze, Don’t Replace

Are you tired of the rusty, cracked and dented bathtub? Are you thinking of transforming your bathroom into a cool, modern place? We know, the first thing that comes to your mind is replacing all the fixtures and the wall and floor tiles. You may even be inclined to replace the countertops and the cabinets in your kitchen. However, we have a better option for you: resurfacing.

By reglazing the wall and floor tiles, cabinets, countertops, bathtub, shower stall, sink, and toilet, you can help protect the environment. If you were to replace all these things, you would have to send the old ones to the landfill. Reglazing will bring your fixtures, tiles, countertops and cabinets to their former glory with minimal effort on your part. Protect the environment. Reglaze, don’t replace!

 

The 7 Benefits of Refinishing

When you choose to work with an established company and a team of experienced reglazing experts, resurfacing has many benefits. Here are just 7 of them:

• You can save a lot of money. If you think about it, replacing just the hot tub will set you back more than $2,000. How much more would it cost to replace the tiles and the other fixtures? Resurfacing can be done for just a fraction of the price.
• You don’t have to do demolition or construction work. You don’t have to worry about the mess because there won’t be any. At most, our experts will remove the grouting and then regrout the tiles.
• You can change the color of the fixtures and tiles. Our company enables you to choose from a wide palette of colors for your fixtures and tiles.
• You can prolong the life of the fixtures by up to 8 years. We use professional-grade solutions that will not peel off or discolor for many years.
• You don’t have to pay a waste removal company. Because there is no construction work involved, you don’t have to pay for waste removal.
• The resurfacing process is done in just a couple of hours. While replacing tiles, fixtures and cabinets can take weeks, resurfacing your entire bathroom and kitchen will take just a couple of days.
• The new coating protects you from lead, especially if you have an old porcelain tub. Old porcelain tubes have been shown to contain unsafe levels of lead. The new coating will protect you from this harmful chemical.

 

Why Choose Us?

If you want the best and most affordable tub refinishing service in NYC, get in touch with us. Our company has been in business for more than a decade and has served thousands of clients all around New York City, including corporate clients and institutions. You can check out our before and after photos to get an idea of how your bathroom or kitchen can look like after our experts resurface everything.

 

What Can We Resurface?

We have extensive experience refinishing a wide variety of fixtures, including bathtubs, shower stalls, Jacuzzis, sinks, toilets, and urinals. In addition, our experts can reglaze your wall and floor tiles. If you want to protect yourself and your loved ones from slip and fall accidents, we can apply our anti-slip coating to floor tiles, tubs and shower stalls. Of course, our team is more than capable of resurfacing your cabinets and countertops. You can pick any color from our palette if you would like to change the color of your items.

 

Is Reglazing Expensive?

Many people think that reglazing is expensive. We can assure you that it is not. Of course, the price depends on the fixtures you wish to reglaze. However, you will quickly realize that refinishing the fixtures, tiles and countertops is much cheaper than replacing them. The process can be done in just a few hours, if we’re talking about the average bathtub. An entire bathroom can be reglazed in one or two days.

Not only is reglazing affordable, it is also an ecological way to get yourself a modern bathroom or kitchen. Why send the old fixtures to the landfill when we can breathe new life into them? You can continue using them for another 6 to 8 years because we use durable, professional-grade bonding and coating agents.

 

You’ve probably heard about reglazing and all its benefits. Nowadays, more and more homeowners are resurfacing their bathroom fixtures. After all, why would you want to replace fixtures that can be made to look like brand new for just a fraction of the price of replacing them? However, did you know that countertops can also be refinished? The process is similar to fixture reglazing, so you won’t have to worry about the mess caused by construction work. Our company has been refinishing countertops for more than 10 years, so you can rely on our services if you want to breathe new life into your old items.

 

Is Countertop Refinishing Cheaper Than Replacing?

A reliable company can resurface not only bathroom vanities, bath tubs and sinks. You can also have the laminate breakfast bars, kitchen countertops and even cultured marble sink vanities refinished. And the best thing about refinishing is that it can save you a lot of money. Resurfacing is much cheaper than replacing everything. In addition, refinishing is eco-friendly because you are not forced to throw away the old countertops and fixtures. It’s worth mentioning that our company uses eco-friendly agents.

 

More Advantages of Countertop Resurfacing

There are even more advantages to refinishing your countertops. Here are some of the main benefits you can take advantage right away:

• We can refinish your countertops the very same day you contact us. The process doesn’t take more than a couple of hours.
• You can use the countertops after a day or two. You don’t need to waste days searching for affordable countertops and then installing them.
• The refinished surface looks brand new. Many of our clients told us that the refinished surface is even glossier than they had expected.
• During the resurfacing process, the surface of the countertops is repaired. Yes, the end result will be breathtaking.
• And did you know that we can change the color of the items we resurface? Simply choose the color you like and we’ll get it done.
• A refinished surface can last for up to 8 years without peeling off or getting discolored.

 

The 5 Steps to Refinish a Countertop the Right Way

You are probably thinking that a resurfacing job is quite difficult to do. Well, since our professionals have years of experience refinishing all sorts of countertops, we can do a great job in record time. It’s also worth noting that we use professional-grade agents and equipment. Here are the basic steps involved:

1. First, the area around the countertop is masked to prevent the agents from getting on other surfaces/fixtures.
2. The surface of the countertops is repaired. We will fix any dents or cracks as best as possible.
3. The area to be refinished is thoroughly cleaned. In some cases, we may need to sand down the surface.
4. We will apply an etching agent followed by a bonding agent. These two agents will ensure the coating adheres properly to the surface.
5. The coating is applied using high-pressure equipment. You can use the countertop after the coating cures (in one to two days). You are advised to avoid using any cleaning solutions for 7 days, however.

 

Is a DIY Solution Any Good?

There are do it yourself solutions that one can use to refinish countertops. However, we do not advise you to use them if you want a lasting solution. These DIY kits are not designed to be used for professional resurfacing. In other words, the coating will not adhere properly to the surface and will start to peel off in a couple of months in most cases. The coating is also prone to discoloration and other problems.

If you want your countertops to be refinished correctly, you should hire a reglazing company. Not only will you be able to use the countertops for up to 8 more years, you will also get a warranty. Remember, DIY solutions don’t come with a warranty for a reason.

 

Always Hire Professionals

It is very important to work with a contractor who knows what he’s doing. Refinishing countertops is not something inexperienced contractors should attempt. Not if you want lasting results. Always make sure that the company you are working with sends you licensed and/or insured contractors. Avoid ads you find on Craigslist or Facebook. If you want the contractor to do a good job, you need to make sure he has extensive experience and that he uses professional agents and solutions. You can use a DIY kit yourself, after all. The main reason you are paying for a professional is because you want top quality customer service and a warranty. For top results, get in touch with us.

 

If you are reading this, you are probably interested in finding the best bathtub reglazing company in NYC. However, many people don’t know much about tub refinishing and how it can save them money. Perhaps you’ve heard about reglazing from a friend or the term popped up in Google. In this blog post, we will explain why reglazing is your best option if you want to bring your bathtub or other fixtures back to life. We will also show you how to pick the right company for the job.

 

Bathtub Reglazing Instead or Replacing

Don’t know what bathtub reglazing means? Reglazing (also known as refinishing or resurfacing) is the process applied to old bathtubs to repair them and to replicate the look and feel of the original porcelain. If the job is done by an experienced professional (using top quality products), you won’t be able to tell the difference between a refinished fixture and a brand new one.

Why reglaze instead of replace? The simple answer is: cost. While replacing a tub can cost up to $3,000, resurfacing it shouldn’t set you back more than $500. This means you can save quite a lot of money. In addition, you help protect the environment by not sending the old tub to the landfill.

 

The Resurfacing Process

You are probably interested to learn more about the resurfacing process. How is it done? Well, it’s not as complicated as you think. Here are the basic steps a professional would take to reglaze your fixture:

1. The caulk is removed and the surface behind the wall is dried.
2. The surface of the bathtub is thoroughly cleaned and even sanded down, if necessary.
3. All chips and cracks are repaired and any rust is removed.
4. The professional applies etching agents that will make the surface adequate for the bonding agents.
5. The area around the fixture is masked to prevent the agents from getting on your tiles or other fixtures.
6. The bonding agent is applied to the surface of the tub
7. After around 30 minutes, the coating is applied. If necessary, a second layer of coating may be applied.
8. The tub is left to cure. You should not use it for 24 to 48 hours. Refrain from using cleaning solutions for 7 days.

 

Choosing the Right Company

OK, but who should you call if you want to have your bathtub refinished? We know, there are a lot of options in NYC. However, as in every other industry, some companies are better than others. Here are some of the things to keep in mind when picking the right reglazing company:

• Is the company insured and/or licensed? It’s important to know who enters your home, isn’t it?
• Does the company offer a warranty? You want to get a guarantee that the coating won’t peel off in 12 months, after all.
• Does the company have extensive industry experience? You want a company that has been refinishing tubs for at least 5 years.
• What kind of equipment and agents does the company use? For instance, we use professional-grade agents for tub reglazing.
• How much does a resurfacing cost? Remember, the cheapest solutions aren’t always the best choice.
• How does the company’s website look like? You can usually get a feel of a company’s level of professionalism simply by taking a look at their website.
• Can you find a portfolio section or a before/after section on the company’s website? Established reglazing companies usually have plenty of before and after pictures from completed jobs.

 

The Benefits of a Proper Tub Refinishing

Choosing the most reliable company for tub reglazing in NYC is not difficult, if you pay attention and do a bit of research. Remember that the company should use professional-grade agents and equipment. After all, if you wanted to refinish the tub using Do It Yourself products, you could have done so yourself. Using quality agents provides you with the most benefits.

For example, reglazing a bathtub the right way usually prolongs its life by 6 to 8 years. The coating will not peel off and the tub won’t discolor anytime soon. Not only will you save a lot of money by refinishing the tub; you will also be able to change its color. An established refinishing company can give you a wide range of colors to choose from. And of course, you can contract the same team to reglaze your other fixtures and even the floor and wall tiles. For example, we can reglaze everything in your bathroom and completely change the look and feel of the room in no time.