If you are looking for an inexpensive tub restoration service, you already know that you have several alternatives. All of them are better, and much more affordable, than replacing the bathtub. The top two options for you are reglazing and tub liners. But which one is better? Should you pay a Bronx bathtub reglazing service for a refinishing job? Or perhaps a tub liner would be better.

What Is Tub Reglazing?

Tub reglazing is a pretty simple thing, but only if it is done by a trained and experienced professional. Here is what is done during a reglazing procedure:
The fixture is sanded thoroughly. You can reglaze anything, including urinals, tubs, sinks, toilets, and even wall tiles.
1. Cracks and chips are repaired and rust is removed.
2. A bonding agent is applied evenly on the surface.
3. A primer is applied.
4. The reglazing finishing is applied. The mix is sprayed evenly onto the surface of the tub.
5. You then wait for the finishing to dry (24 to 48 hours).
Reglazing has excellent results. The finishing will be like the original enamel on your tub.

What Are Bathtub Liners?

A bathtub liner is custom made for your tub. In most cases, this means somebody has to come and measure the bathtub, and then a custom liner has to be manufactured. The liner is placed over the tub and sealed so that water, soap and dirt can’t get underneath it. Unlike reglazing, the use of a liner does not get rid of rust, grime, stains, or cracks. It just covers them.

Which Is Better?

If you are looking after cheap remodeling for your tub, reglazing is clearly the best option. It can prolong the life of the tub by another 10 years. And with this inexpensive tub restoration service, you effectively get rid of all stains, cracks and rust. Let’s not forget that reglazing is cheaper than ordering a bathtub liner. Moreover, the finished appearance is much better after a professional reglazing.

Are you considering replacing the bathtub? Or even worse, are you considering replacing all the fixtures in your bathroom? We know that rust, stains, grime, chips, and cracks look awful. However, there is a better option – and one that is also sustainable: refinishing. By refinishing the tub, you will make it look like brand new. Yes, the finishing will feel and look exactly like the original enamel. And no, it will not cost a fortune! Refinishing is gaining more and more traction with homeowners nowadays exactly because it is an inexpensive tub restoration service. How much can you save with a refinishing project? Let’s find out!

An Affordable Solution for Your Bathroom

If you are looking for cheap remodeling for your tub, refinishing is everything you need. The various bonding agents, primers and finishing materials all work together to form a coating that resembles the original coating of the tub. And did you know that refinishing can be applied to toilets, urinals, sinks, and even wall tiles? Yes, refinishing has the potential to make your bathroom a cool, modern place once again. Now let’s talk about savings. Refinishing a tub costs less than $500. Replacing the bathtub usually costs more than $2,500, labor and materials included. So by choosing refinishing over replacing you save $2,000. Furthermore, reglazing your fixtures helps the environment. Now, these products no longer have to end up in the landfill.

Who Can Help You?

When you want to do tub repair for rust stains and damage, refinishing is your best option. During the refinishing process, the fixture is sanded and all rust is removed. All the cracks and chips are repaired before the bonding agent and the primer are applied. The end result is a perfect coating. No more grime, no more cracks, no more rust, no more stains! But to get the best possible results from the refinishing job, you need a professional who has extensive experience doing tub reglazing in Bronx, NY. When you work with an expert, you also get guarantees and a warranty. You are 100% protected!

Are you tired of seeing those cracks and chips on your bathtub? Or perhaps you want to get rid of all the grime and stains on the tub. Truth be told, an ugly tub can be quite uninviting. Long gone are the days when all you wanted was to get home and sink in the tub. We have some good news for you though. You can bring your tub back to life, and you don’t have to spend $2,000 to do it (the average cost of replacing a bathtub). By refinishing the tub, you can make it look and feel like new. And did you know that refinishing can be performed on all types of tubs, including acrylic, plastic and fiberglass? Even better, refinishing can be used on urinals, toilets, sinks and even wall tiles. That’s right, you can remodel your bathroom entirely!

How Refinishing Works

Refinishing is a cost effective bathtub remodeling option. While replacing the tub would typically cost more than $2,000, a refinishing job can be done for as little as $350. These are some serious savings. Moreover, refinishing is an eco-friendly, inexpensive tub restoration service. You don’t have to throw the old, rusty bathtub away. All you have to do is restore it to its original condition with a professional refinishing job. During the procedure, the surface is sanded and then a layer of bonding agent is applied. During the next step, the finishing (coating) is applied by spraying. After 24-48 hours of drying, the surface of the tub will be in mint condition and will look and feel like the original enamel.

Refinishing Plastic and Fiberglass Tubs

Refinishing can be done on any tub, no matter what material it’s made of. So yes, you can definitely reglaze plastic and fiberglass tubs. They can be sanded and the bonding agent works just fine on them. For the best results, you will have to use the services of a bathroom professional. The refinishing process is pretty complex and requires some specific tools and skills. We recommend you find the best bathtub reglazing service in New York and get in touch with their experts. Keep in mind that the quality of the work, as well as the end result, depends on the skills and knowledge of the professional who does the refinishing job. For top quality, work with the best!

Are you tired of seeing those cracks and chips on your bathtub? Or perhaps you want to get rid of all the grime and stains on the tub. Truth be told, an ugly tub can be quite uninviting. Long gone are the days when all you wanted was to get home and sink in the tub. We have some good news for you though. You can bring your tub back to life, and you don’t have to spend $2,000 to do it (the average cost of replacing a bathtub). By refinishing the tub, you can make it look and feel like new. And did you know that refinishing can be performed on all types of tubs, including acrylic, plastic and fiberglass? Even better, refinishing can be used on urinals, toilets, sinks and even wall tiles. That’s right, you can remodel your bathroom entirely!

How Refinishing Works

Refinishing is a cost effective bathtub remodeling option. While replacing the tub would typically cost more than $2,000, a refinishing job can be done for as little as $350. These are some serious savings. Moreover, refinishing is an eco-friendly, inexpensive tub restoration service. You don’t have to throw the old, rusty bathtub away. All you have to do is restore it to its original condition with a professional refinishing job. During the procedure, the surface is sanded and then a layer of bonding agent is applied. During the next step, the finishing (coating) is applied by spraying. After 24-48 hours of drying, the surface of the tub will be in mint condition and will look and feel like the original enamel.

Refinishing Plastic and Fiberglass Tubs

Refinishing can be done on any tub, no matter what material it’s made of. So yes, you can definitely reglaze plastic and fiberglass tubs. They can be sanded and the bonding agent works just fine on them. For the best results, you will have to use the services of a bathroom professional. The refinishing process is pretty complex and requires some specific tools and skills. We recommend you find the best bathtub reglazing service in New York and get in touch with their experts. Keep in mind that the quality of the work, as well as the end result, depends on the skills and knowledge of the professional who does the refinishing job. For top quality, work with the best!

Can acrylic bathtubs be reglazed? This is a very common question among people who want to perform a refinishing job on their bathroom fixtures. Most people know that one can perform a refinishing on almost any fixture, including tubs, toilets, urinals, and sinks. Also, you can do a refinishing on all the wall tiles. Refinishing means carefully sanding the surface, applying a layer of bonding agents, and then applying a relatively thick layer of finishing substances. These substances will cure into a very hard finish that looks and feels like the original enamel. Basically, the surface will look brand new. All the cracks, rust, grime, chips, and stains will be gone after the refinishing project.

What Are Acrylic Tubs?

So, you want to use refinishing as an inexpensive tub restoration service, but don’t know if your tub can be reglazed. The good news is that it is definitely possible. In fact, you can refinish any acrylic fixture, including acrylic sinks. In case you are wondering, acrylic tubs are made out of sheets of acrylic. This material is relatively soft, so it is perfect for making a wide variety of bathtubs. However, because it is soft, acrylic usually needs to be reinforced with fiberglass. An important benefit of acrylic tubs is that they are light, so they can be installed on any level of your home.

Any Problems With Reglazing Acrylic Tubs?

Refinishing an acrylic tub is just like refinishing any other fixture. There are no special requirements or dangers. So why would replace the tub or sink when you can simply do a refinishing job? You just need an established company that does tub reglazing in New York. Why? Because refinishing is not something you should attempt to do yourself. The substances contain various chemicals, some of which are toxic. There have been many cases where even professionals suffered health problems during the refinishing of a tub or a toilet.

Reglaze, Don’t Replace!

Looking for cheap remodeling for your tub? Do you want a cost effective bathroom remodeling method? We recommend you refinish the tub! By refinishing instead of replacing the fixture, you save a lot of money. In addition, you are not throwing away an item that you can refinish and continue using. Refinishing is an eco-friendly way to change the aesthetics of your entire bathroom. And don’t forget the importance of a professional recaulking and regrouting job!

Are you considering a reglazing? Great choice! The reglazing procedure will bring your bathroom to life in no time. And best of all, it will be a cheap and safe way to restore all the fixtures in the bathroom to their former glory. This inexpensive tub restoration service is perhaps the best choice for people who don’t want to spend $2,000 to replace the bathtub. And did you know that reglazing can be performed on fixtures such as urinals, wall tiles, sinks, and even toilets? If you also do a regrouting and recaulking job, your bathroom will look like new.

The Proper Reglazing Procedure

Before we can explain how long you need to let the bathtub dry after the reglazing procedure, let’s talk about the procedure for a bit. People know only that reglazing is a cheap remodeling for your tub. It’s perfect for when you want to do a tub repair for rust stains and damage. However, few people know what the procedure involves. After the fixture is sanded and all cracks and chips repaired, the expert applies some bonding agents. Then the actual finishing substances are mixed together in a specific way and sprayed onto the fixture. After the reglazing procedure, you need to follow some simple steps.

What Homeowners Should Do

The professional from the New York tub reglazing service of your choice has just completed the refinishing project. What should you do now? The first thing to keep in mind is that the bathtub and any other fixtures that have been refinished are off limits until the coating cures. Until the finishing dries, it is a good idea to leave the house. However, it’s not necessary if the bathroom is properly ventilated.

The Perfect Drying Conditions

You should let the tub surface to cure for 24 to 48 hours. After the surface has dried, it is 100% safe to use the bathroom fixture. However, there are various things that can affect the drying time. For example, if the bathroom is not properly ventilated, if the air is too moist, or if the weather is not warm enough, you may need to let the tub cure for three to four days. Remember that the bathroom should be properly ventilated during this time. To find out the exact drying time, you should ask the reglazing professional. Some products are better than others and dry faster, but they are also more expensive.

Many people want to know if they can change the color of their bathtub. The simple answer is “Yes!” All you need to do is order a reglazing service from a reliable bathtub reglazing company in NYC. If you’ve never heard about reglazing, let’s explain it briefly. It’s a process of resurfacing of surfaces in your bathroom. It can be done on anything from tubs and wall tiles to urinals, sinks and toilets. During the reglazing process, the surface is thoroughly sanded. Then problems like cracks and chips are repaired. A layer of bonding primer is applied to the surface and then the finishing substances are carefully sprayed onto the surface multiple times. These substances will cure to a hard finish that will look exactly like enamel – and feel like it too. Yes, reglazing is exactly the same thing as refinishing.

Reglazing Benefits

Reglazing is an inexpensive tub restoration service. You can get a cheap remodeling for your tub for just a quarter of the price of replacing the bathtub. So the most important benefit of reglazing is its low price. While replacing the tub will cost you over $2,000, a reglazing job typically costs around $400-$500. Reglazing restores all your fixtures to their former glory. Everything will be shiny and white again. No more rust, no more grime, and no more chips! A reglazing job done by a seasoned professional will typically last for many more years. Why throw away items you can refinish and continue using?

Changing the Color of the Tub

As we said earlier, the last step is the application of the finishing reglazing substances. These can, of course, be sprayed in the color chosen by the customer. You can change the color of your bathroom simply by reglazing all the fixtures and the wall tiles. It’s cheap, quick, and safe! And best of all, no item is removed from its place. If you also do a full regrouting and recaulking job, your bathroom will look like brand new!

This Is Not a DIY Job

Even though reglazing is a cost effective bathtub remodeling method, keep in mind that it is not something you should do yourself. The solvents, bonding agents, and finishing substances contain toxic compounds. The fumes from these chemicals can seriously harm you or your loved ones. This is why we always recommend you work with an experienced professional. Don’t risk your health!

Many people don’t realize the dangers of doing a bathroom reglazing job themselves. It’s just a resurfacing of surfaces job. How hard can it be? Reglazing tubs, sinks, urinals, toilets, or wall tiles may not be a very difficult job, but it’s definitely a dangerous one. It is nothing like regrouting or recaulking. If you want a cheap remodeling for your tub, you should work with experts who know what they are doing. Contact a bathtub reglazing company in Queens, NY and let trained and insured professionals take care of the job for you. Here is why!

What Exactly Is Bathtub Reglazing?

Reglazing your bathtub means sanding it thoroughly, repairing all the cracks, and then applying various bonding agents and primers. These solutions and materials cure to a very hard finish. Basically, the finish will be exactly like enamel, both in color and texture. Reglazing doesn’t sound dangerous, we know. However, more than 14 people have lost their lives since 2000 while working on reglazing various fixtures in bathrooms. And these were trained professionals in most cases! So the answer is yes, reglazing is a dangerous process.

Are the Materials Dangerous?

The answer to this question depends on many things. And inexpensive tub restoration service will usually use cheaper and riskier chemicals. For example, stripping agents that contain high levels of methylene chloride are frequently used – and so are acids and isocyanates. These solutions are very effective when used adequately. In fact, the reglazing procedure is perfect for tub repair for rust stains and damage. It’s also a cost effective bathroom remodeling method. However, one must take great care during the reglazing operation. The small size of the bathroom means there is usually not enough ventilation to effectively eliminate the methylene chloride vapors. In sufficient quantity, these vapors will cause fatigue, dizziness, nausea, and even eye and throat irritation. In severe cases, methylene chloride can stop breathing.

Should You Be Worried?

Reglazing is a perfectly safe procedure when it is done right. In other words, let an expert do the job. He has experience and adequate tools, and he knows how to work safely. Also, the results are breathtaking when the reglazing is done by a seasoned professional. After the materials cure (in around 2 days), there is absolutely no danger to use the bathtub or the bathroom. You only need to be worried during the reglazing procedure.

Almost anyone who has considered reglazing their bathroom fixtures (tubs, sinks, urinals, toilets, wall tiles, etc.) has considered doing it themselves. After all, not throwing away items you can refinish and continue using is an excellent way to not only save money but also help the environment. The fewer items end up in the landfill, the fewer new products are manufactured – and the less greenhouse gases are emitted. And reglazing is perfect for tub repair for rust stains and damage. But is reglazing really a DIY project?

The Process of Tile Reglazing

While most people can handle a regrouting or a recaulking job themselves, reglazing is a different matter entirely. Why? Because reglazing your tiles involves using toxic materials and substances. You have to work with various primers, bonding agents, and even stripping products. According to the CDC blog, more than 14 workers have died since 2000 while refinishing bathroom fixtures using stripping agents. Yes, in some cases, agents containing methylene chloride are used during the refinishing process. This compound is highly toxic and dangerous.

Don’t Try It at Home

Reglazing is basically a resurfacing of surfaces, but it’s a very complex process. Even DIY kits contain dangerous substances. If you want to bring your tubs, sinks, urinals, toilets, and wall tiles to their former glory, you should get in touch with a professional NYC tile reglazing service. A trained and insured professional is the perfect choice for any reglazing project. He knows exactly how to do an excellent job, safely. Don’t get hurt while trying to do a cost effective bathroom remodeling job. It’s not worth it, guaranteed!

The Benefits of Working With Experts

Hiring a professional to do the refinishing has many more benefits, of course. Not only will you and your loved ones be safe, you will also get the best results. Furthermore, you will be able to enjoy your shiny tub, sink, urinal, toilet, and wall tiles for many more years. And keep in mind that a reliable, trustworthy bathroom company will give you a comprehensive warranty that you can rely on for years.

You’ve probably heard about tile reglazing. If you haven’t, let’s briefly tell you what it is and what you can expect from a tile reglazing procedure (if it’s done right, of course). But first, let’s discuss the most important part of the reglazing process: choosing the right professional for the job. The Internet is full of people and companies that boast about their ability to make your tiles look like new. The sad reality is that tile reglazing is a difficult job. Doing it right and getting the best results requires a set of complex tools and equipment. Furthermore, the person doing the reglazing must have years of experience.

But What Is Tile Reglazing?

Before you contact the best tile reglazing service in Brooklyn, you should learn what reglazing is. Reglazing means sanding the surface, applying bonding agents, applying primers, and then applying various other materials that act as a coating. The results are outstanding. In fact, the finish looks exactly like the original surface of the tiles. Reglazing is a cost effective bathroom remodeling procedure that can be applied to not only tiles, but also tubs, sinks, urinals and toilets. Reglazing, coupled with regrouting and recaulking, will bring your bathroom back to life. Everything will shine and you will get rid of all the rust, grime, leaks, and cracks.

What You Can Expect From Reglazed Tiles

Refinishing your tiles is an amazing way to keep them looking gorgeous for years. In fact, reglazing has been proven to last for more than 10 years, if you take care of your bathroom tiles. This means cleaning them periodically and avoiding any abrasive substances or cleaning products. Your tiles will look like brand new if the reglazing procedure has been done by a seasoned professional. Moreover, the cost of the reglazing procedure is less than 25% of the cost of replacing all the tiles in your bathroom. Why waste your money when you can achieve the same result (and help the environment) by reglazing your bathroom tiles? And as a bonus, you won’t have to deal with any garbage.